Related Manuals for Electrolux CHI 950
Summary of Contents for Electrolux CHI 950
- Page 1 I N S T R U C T I O N B O O K FOR ELECTROLUX COOKER HOOD CHI 950 cod. 436002578_03 - 060403...
- Page 3 If you require guidance in the use of the appliance or require further information on Electrolux Products, please contact our Customer Services Department. For general enquiries con- cerning your Electrolux appliance or for further information, visit our website at http://www.electrolux.co.uk...
-
Page 4: Important Safety Information
• Under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by inexperienced persons may cause injury or more serious malfunction. Refer to your local Electrolux Service Force Centre. Always insist on genuine spare parts. -
Page 5: Your Appliance
YOUR APPLIANCE... -
Page 6: Control Panel
OPERATING INSTRUCTIONS The cooker hood is designed to extract unpleasant odours from the kitchen, it will not extract steam. The appliance can be installed to recirculate or extract contaminated air. Control Panel The hood can be switched on pushing directly onto the requested speed without fi rstly having to select 0/1 but- ton. -
Page 7: Maintenance And Cleaning
MAINTENANCE AND CLEANING Before carrying out any maintenance or clean- ing isolate the cooker hood from the mains supply. The cooker hood must be kept clean, as a build up of grease or fat can be a fi re hazard. External Cleaning Wipe the cooker hood frequently with warm soapy water using a mild detergent. -
Page 8: Charcoal Filters
MAINTENANCE AND CLEANING Before carrying out any maintenance or cleaning isolate the cooker hood from the mains supply. Charcoal Filters In the recirculation mode the charcoal fi lters absorb smells and unwanted odours. Enabling the alarm signal • In Recirculation version Hoods, the Filter saturation alarm can be enabled on installation or at a later date. •... -
Page 9: Something Not Working
For general assistance with your appliance or for further information on Electrolux products please contact our Customer Services Department. Customer Services Department Major Appliances... - Page 10 GUARANTEE CONDITIONS We Electrolux, undertake that if within 12 months of the date of the purchase this Electrolux built-in appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, the company will, at our option repair or replace the same FREE OF ANY CHARGE for labour, materials or carriage on condition that: •...
-
Page 11: Installation Instructions
INSTALLATION INSTRUCTIONS It is dangerous to alter the specifi cations or attempt to modify this product in any way. Technical Information DIMENSIONS ELECTRICAL SUPPLY: Note: CE Marking certifi es that this appliance complies with the requirements laid down in EEC directive 89:336. (Electromagnetic compatibility) and subse- quent modifi... -
Page 12: Installing The Cooker Hood
INSTALLING THE COOKER HOOD Please ensure that when the appliance is installed it is easily accessible to an engineer in the event of a breakdown. All installations must comply with the local authorities requirements for the discharge of exhaust air. Incorrect installation may affect the safety of this cooker hood. - Page 13 INSTALLING THE COOKER HOOD Clearance Height The cooker hood is designed to be fi tted over a cook- ing appliance at the clearance heights stated, providing the maximum output of the appliance beneath does not exceed the maximums quoted in the Technical Speci- fi...
-
Page 14: Drilling The Ceiling/Support Shelf
INSTALLING THE COOKER HOOD Drilling the Ceiling/Support Shelf • Use a plumb line to mark the centre of the hob on the ceiling/support shelf. • Place the drilling template 21 provided on the ceiling/ support shelf, making sure that the template is in the correct position by lining up the axes of the template with those of the hob. - Page 15 INSTALLING THE COOKER HOOD Before tightening the screws completely it is possible to adjust the frame by turning it. Make sure that the screws do not come out of their seats in the slotted holes. • The frame mountings must be secure to with- stand the weight of the hood and any stresses caused by the occasional side thrust applied to the device.
-
Page 16: Ducting Connection
INSTALLING THE COOKER HOOD Ducting Connection Connect the ducting chosen to: • the Ø150mm ducting spigot on top of the motor housing, or the Ø150-120mm ducting spigot item 9 and secure using the jubilee clips item 25. • A Ø120-125mm collar item 9.1 is provided to fi t over the Ø120mm ducting spigot when 125mm ducting is fi... -
Page 17: Chimney Stack
INSTALLING THE COOKER HOOD Chimney Stack The chimney consists of two sections. The lower chimney measures 700mm and the upper chimney (with the recirculation grilles on either side) measures 415mm. The overall installed measurement is min. 810 - max 1050mm. Fitting the Chimney •... -
Page 18: Service And Spare Parts
Service Force Centre covering your post code area. Customer Care Department For general enquiries concerning your Electrolux appliance or for further information on Electrolux products, please contact our Customer Care Department by letter or telephone at the address below Customer Services Department... - Page 20 Addington Way - Luton BEDFORDSHIRE LU4 9QQ © Electrolux plc 2002...