Table of Contents
Advertisement
Programmable functions
Buzzer (P20)
When the buzzer function has been
activated, an audible tone sounds re-
peatedly at the end of a programme
or when Rinse hold is reached.
The buzzer will sound for up to an hour
after the programme has finished.
The washing machine is delivered with
the buzzer deactivated.
1
Follow steps
and store in memory.
The programmable functions are acti-
vated to call up further features not
shown on the control panel by using
the additional option buttons in combi-
nation with the programme selector.
Before you begin, first ensure that:
– The washing machine is switched off.
– The drum door is closed.
– The programme selector is at Finish.
.
38
7
to
to programme
1
Press the additional option buttons
Short and Water plus at the same
time, hold pressed in and . .
2
. . . switch on the machine with the
I-ON / 0-OFF button.
3
Let go of all these buttons. P 0
appears in the display.
4
Turn the programme selector to COT-
TONS 75°C:
5
The P will now flash in the display
alternating with the number 11
In addition, one of the following will
appear on the right of the display:
0 = Buzzer is deactivated
1 = Buzzer is activated
6
Press the START button to change
from one to the other. The display
will change accordingly from 0 to 1
or from 1 to 0 .
7
Switch the washing machine off with
the I-ON / 0-OFF button.
The setting you have selected is now
stored in memory and will remain so
until you alter it.
Hide quick links:
Advertisement
Table of Contents
