Attaching Text Memos; Attaching Shot Marks - Panasonic AG-HPD24PJ Operating Instructions Manual

Attaching text memos

When a text memo is added, you can open a thumbnail at the
text memo location for playback or copying and seek (move)
text memo location by pressing the NEXT/PREV button during
video playback.
(➝ Setup Menu "BASIC" page 59)
1
Assign TEXT MEMO to a USER button.
It is assigned to the USER3 button by default.
(➝ Setup Menu "USER BUTTON" - "USER3" page 71)
2
Press the USER button to which TEXT MEMO has
been assigned during recording, playback or
thumbnail display.
• Press this button during recording and playback where
you want to attach a text memo. The OSD will then show
TEXT MEMO (when successful) or INVALID (when
addition is not possible).
• Pressing this button on the thumbnail screen adds a text
memo at the thumbnail clip location (normally at the
beginning).
◆ NOTE:
• Up to 100 text memos can be attached in one clip.
• Pressing the USER button to which TEXT MEMO has been
assigned during playback may temporarily freeges the
playback screen. This is normal and not a malfunction.
• During LOOP REC, or during recording when the SETUP -
BASIC - VFR REC menu setting is ON, text memo recording is
not available.
Deleting text memos
Changing the thumbnail screen to the text memo display
allows you to delete text memos.
1
Change the thumbnail screen to the text memo
display.
2
2
Use the Up/Down/Left/Right cursor buttons to move
the cursor to the thumbnail you want to delete and
press the SET button.
The cursor moves to the row below.
3
After pressing the SET button to select a thumbnail
for deletion, choose the OPERATION - DELETE
menu setting and press the SET button.
When DELETE is assigned to a USER button, you can
delete the thumbnail by pressing the USER button instead
of making a menu selection.
4
Select YES in the confirmation dialog that appears.
The text memo is deleted.

Attaching shot marks

Attach shot marks to clips to make it possible to distinguish
them from each other.
1
Assign MARKER to a USER button.
It is assigned to the USER6 button by default.
(➝ Setup Menu "USER BUTTON" - "USER6" page 71)
2
Use the Up/Down/Left/Right cursor buttons to select
a clip.
3
Press the USER button to which MARKER has been
assigned.
2,3
2
3
Main Mode: Thumbnail Screen
17