Fujitsu Lifebook N6470 Getting Started Manual

This convenient guide will lead you through the start-up
process and will also offer some valuable tips.
What's in the Box
Check to see that all of the following items are in the box:
❏ LifeBook notebook ❏ Recovery and Utility disc
❏ Lithium ion battery, pre-installed ❏ Phone/modem (RJ-11) telephone cable
❏ AC adapter with power cord ❏ Genuine Windows Vista® recovery and utility disc
❏ Drivers and Applications Restore disc ❏ Microsoft Windows Application discs
❏ Microsoft® associated material ❏ Roxio Creator LJ disc
Depending upon your confi guration, the following items may also be shipped with your notebook:
❏ ArcSoft WebCam Companion ❏ CyberLink PowerDVD™ (BD), CyberLink
❏ CyberLink PowerDirector™ DE,
PowerDirector™ DE, CyberLink MakeDisc™
CyberLink MakeDisc™ (For Blu-Ray drive confi guration)
Controls, Connectors,
and Access Points
Volume Control
Wireless LAN Switch
Keyboard
Touchpad Pointing Device
Fingerprint Recognition
Sensor/Also works as
Scroll Button
Stereo Speakers
Status Indicator Panel
RIGHT PANEL BACK PANEL
IEEE 1394 Port
Memory Stick/SD/xD Card Slot
Headphone Jack
ExpressCard Eject Button
Microphone Jack
USB 2.0 Port
PC Card Eject Button
Sub Woofer Air Chamber
S-Video Out Port
PC Card Slot (bottom of unit)
ExpressCard Slot
LEFT PANEL BOTTOM PANEL
Optical Drive
Confi guration
Label
(approximate
location)
Air Vents
(multiple locations)
DC Power Jack Optical Drive Eject Button
Initial Start Up
Display Latch
Button
DC Power
Jack
❏ Additional Lithium ion battery
❏ Remote control and IR Receiver
❏ TV Tuner Express card and software CD
AC Cable
Display Panel Latch
Display Panel
Visual Optimizer
Button
Telephone
Jack
Application/Media
Player Buttons
Power/Suspend/
Resume Button
LAN Jack
HDMI Port
USB Port
Lock Slot
Modem Port
External Video Port
Air Vents
LAN Port USB Ports
+
Volume
-
Lithium ion
Battery Bay
WLAN
Memory
Upgrade Switch
Compartment
Subwoofer
1. Open the Display Panel
• Ensure that your LifeBook is on a hard level surface and that
the air vents are not blocked.
• Lift the display, being careful not to touch the screen.
• Adjust the display until it is at a comfortable viewing angle.
2. Connect AC Power
• Plug the AC adapter into your notebook.
• Plug the power cord into the AC adapter.
• Connect the power cord to an electrical outlet.
3. Connect to Internet or Network
• Connect either a phone cord to the modem jack or an Ethernet
cable to the LAN jack on your notebook and to a wall jack
or to an Ethernet router.
Important:
• During the setup procedure, do not disconnect the power supply,
DC
press any buttons, shut down your computer, or use any peripheral
Output
devices such as a mouse, keyboard, or remote control.
Cable
• You should not attach any external devices and do not put a DVD/CD in
AC Adapter
your drive until you have gone through the initial power on sequence.
4. Booting the System
The Lithium ion battery is not charged upon purchase.
Initially you will need to connect either the AC adapter
or the Auto/Airline adapter to use your notebook.
• Press the Power/Suspend/Resume/button (above the keyboard) to
turn on the notebook. When you do this for the fi rst time, it will display
a Fujitsu logo on the screen. If you do nothing the system will load the
operating system, and then the Windows Welcome will begin.
5. Installing Click Me!
• Check to be sure the WLAN switch is on.
For Genuine Windows Vista®: In addition to an icon on the
desktop, a dialog box will automatically open that prompts you
to run Click Me!. If you choose not run ClickMe! at this time,
the ClickMe! icon will appear on your desktop.
• When you click the Click Me! icon, your system will automatically
build the icon tray in the bottom right of the screen. These icons
provide links to utilities that you will frequently access.
(For
(For
Additional Latest
Utilities) Drivers)
CLICK ME
"Click Me!" (FDU)
6. Register
For Genuine Windows Vista®:
® ®
• Accept the Microsoft Windows Licensing Agreement and the
Fujitsu End User License Agreement to proceed.
• Select your User ID and Password during the "Welcome Screen."
• Keep a record of your User ID and password stored in a secure place.
• THE SCREEN WILL GO DARK FOR APPROXIMATELY TWO MINUTES.
Power/Suspend/Resume • Do not attempt to turn power on or off during this stage.
Button
7. Registering Your LifeBook notebook
• Register your notebook with Fujitsu Service and Support via our
website at us.fujitsu.com/computers.
• You will need to be set up with an Internet Service Provider (ISP)
to register online.
8. Install Additional Software
• For Blu-Ray drive confi guration, install CyberLink
Power DVD, CyberLink PowerDirector HE, and
CyberLink MakeDisc from disc
• Close any open programs, applications or utilities
Insert software application disc into media drive.
• Open the application folder, select the set-up icon,
and load desired software, as shown in the table.
• Restart your computer.
9. If you purchased the
TV Tuner Option
• Please see the TV Tuner User's Guide for
detailed instructions.
10. Access your User's Guide
• To take advantage of all the features of your new Fujitsu LifeBook
notebook, it is highly recommended that you read your electronic
User's Guide. It contains important detailed information about
your new computer. You can access your User's Guide by
selecting its icon from the screen desktop.
• If you are using Genuine Windows Vista®, Click [Allow] in the
User Account Control (UAC) box.
• Click [Continue]
• Select "I Agree" and click [Continue] in the License Agreement box.
• Select "User's Guide" from the "Utilities/Applications" category.
• Click [Install Selected Subsystems]
• The User's Guide will be copied to your hard drive in the
C:\Fujitsu\Manual directory. Shortcuts to the Users Guide
will be placed on your desktop and in the Start menu.
11. Restoring your System
• If the need arises, you can safely recover back to the factory image
by following a straight-forward procedure which comes with your
recovery disc.
Common Indicators
Status Display Panels
The Status Display Panels are located above the keyboard as shown.
Following are some common indicators.
Battery Charging Indicator EMail Indicator
The Battery Charging indicator displays The Email indicator shows that you have
whether or not the Lithium ion battery received new email.
is currently being charged.
NumLk Indicator
Solid Green—Fully charged
The NumLk indicator states that the
or no battery installed
integral keyboard is set in ten-key
Solid Orange—Being charged
numeric keypad mode.
Blinking Orange—Charging suspended
because battery temperature too high. CapsLock Indicator
The CapsLock indicator states that your key-
Off—Not charging because AC adapter
board is set to type in all capital letters.
is not connected.
ScrLk Indicator
Battery Status Indicator
The ScrLk indicator states that
This indicator shows how much charge
your scroll lock is active.
is available within the installed battery.
Green, solid Between 50%
and 100% charged
Orange, solid Between 13%
and 49% charged
Red, solid Between 0% and 12% charged
Red, blinking There is a problem
with the battery
Off No battery is installed or
the system is shut off.
Hard Drive/Optical Drive
Access Indicator
The Hard Drive/Optical Drive Access indicator
states whether your internal hard drive
or optical drive are being accessed.
Quick Tips
It takes approximately 3 hours to
charge a battery if the notebook
is turned off or is in suspended
mode. In battery mode the proces-
sor runs at half speed to conserve
battery life. SpeedStep is always
on. CPU speed will change
depending on the load.
Optimizing Battery Life
• Set power management setting
to Maximize Battery Life
• Adjust display brightness levels
to lowest comfortable setting
• Remove PC Cards and Express-
Cards when not needed
• Utilize Suspend mode when
not using your notebook
• Turn off Wireless LAN when
not in use
• Close unused programs
• Remove unused USB
powered devices
• Read the Power Management
section in your User's Guide
for additional features
Adjusting display brightness
• Fn + F6 to decrease brightness
• Fn + F7 to increase brightness
Drivers
Look for the latest drivers on the
Drivers and Applications Restore
Disc. Right-click the FDU icon
and select "update", or go to
us.fujitsu.com/computers.
Note: When using Genuine
Windows Vista® Media Center
Edition 2005 in full screen mode,
the function keys' status cannot
be seen on the LCD panel. If you
"minimize" or "restore down"
(shrink) the window, the function
keys' status will appear