Get Started; Connect Speakers; Connect Power; Demonstrate The Features - Philips BTM2180/37 User Manual

3 Get started

Caution
•
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
back of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________

Connect speakers

Note
•
For optimal sound, use the supplied speakers only.
•
Connect only speakers with impedance that is the
same or higher than the supplied speakers. Refer to the
Specifications section of this manual.
SPEAKER OUT (8 )
SPEAKER OUT (8 )
FM
ANTENNA
120 V~, 60 Hz
AC MAINS~

Connect power

Caution
•
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
or the underside of the unit.
•
Risk of electric shock! When you unplug the AC power
cord, always pull the plug from the socket. Never pull
the cord.
•
Before you connect the AC power cord, ensure that
you have completed all other connections.
FM
SPEAKER OUT (8 ) ANTENNA

Demonstrate the features

In the standby mode, you can demonstrate
features by pressing .
» The features are displayed one by one
across the display panel.
• To turn off the demonstration, press
again.
120 V~, 60 Hz
AC MAINS~
EN 8