Switching Audio Control Modes; Vol (Volume) Mode; Bass Mode - Fujitsu ECLIPSE CD8445 Owner's Manual

Basic operation
[AUDIO CONTROL] button

Switching audio control modes

Various audio control modes may be fine-tuned using this procedure.
Press the [AUDIO CONTROL] button for less than one
second to select the item to be adjusted.
Modes will switch in the order shown below each time the button is
pressed.
When the audio control is set to the Advance mode:
When the audio control is set to the Normal mode:
*1: Adjustments cannot be made when the position selector or CS II
is ON.
*2: Setting cannot be made in FM mode.

VOL (VOLUME) Mode

Adjusts volume.
Turn the [AUDIO CONTROL] button to the left or right.
Turn to the right: Increases the volume.
Turn to the left:

BASS Mode

Adjusts bass level. Bass mode can be adjusted for each source
(CDP/CDC, FM and AM and Memory stick player).
Turn the [AUDIO CONTROL] button to the left or right.
Turn to the right: Emphasizes low sounds.
Turn to the left:
1 FAD*
VOL BAL*
2
SVC* NON-F
MID
VOL BASS
2
SVC* NON-F
Decreases the volume.
Softens low sounds.
1
TREB
1 1
FAD* BAL*
46