GETTING STARTED
•
Press the Power Button to turn on the unit.
•
Press DAB / FM button to select DAB or FM
•
Adjust the Volume by pressing Volume Up / Down
FM
•
Press PREV. or NEXT to select frequency
•
Press once to move every 0.05 MHz
•
Press and hold it for 2 seconds and then release the button, it will
seek and stop at next broadcast station
•
Press and hold it, it will keep moving until the button is released
Reception:
If noise is heard when listening to FM, please pull out the FM
*
Antenna and rotate it to a different direction to have a better
reception.
DAB
•
Select DAB mode by pressing the DAB /FM button.
•
Press the SCAN button.
•
The radio will commence the station search process.
During the search process the display indicates the progress and
station found, for example:
Scanning...
The symbols on the second line of the display are a bar graph that
indicates the progress of the scan. The number on the first line indicates
the number of stations found and will increase as the scan progresses.
It is possible to manually search for stations.
If these are no stations found check that adequate DAB coverage
exists in your area.
Once the search has completed the DAB radio will tune to the first
station in the list. Stations are listed in numerical then alphabetical
order.
The station list is retained in memory so the next time you switch the
tuner on, the station search does not take place.
You can, however, choose the station search if you wish to find any new
DAB stations or if the radio has been re-located. Simply press the SCAN
button.
17