System Set-Up; Basic Set-Up - Hitachi PDV512 Instruction Manual

Using the Rechargeable Ni-MH Battery Pack
1. Connect the AC/DC adapter lead to the unit and plug the AC adapter into a mains socket.
2. Switch off the unit by sliding the power switch (OFF/ON) to OFF.
3. The battery will start to charging automatically, at this moment, the charging LED will light in red.
4. When the charge LED blinks in green, the charge is completed.
Notes :
1. Charge the battery pack before using it for the first time. Charge time is normally between 3~4 hours.
Battery pack should be fully charged before use.
2. Charge only with the supplied AC/DC adapter.
3. Do not charge for more than 4 hours as it could reduce service life.
4. When playing the unit in conjunction with the battery pack and battery low character displays, this indicates
that battery power is low and the battery should be recharged.
5. When the battery pack is being charged, the CHARGE LED will light in red when the charge is completed,
the LED will blink in green.
6. When the unit is simultaneously connected to the battery pack and AC adapter, the unit will automatically
select the AC adapter as its power source.
7. Remove the battery pack to avoid leakage if you do not use your set for more than one month.
8. In case the charge LED doesn't light, please check that the battery connection is correct or not.
9. In case the charge is failed and out of time, the charge LED will blink in green and red.
Playback Preparation / Quick Operation Guide
1. Connecting to power ( AC/DC adapter, external DC power source through Cigarette connector cable or
with attached battery pack ).
2. Lift the main cover up ( display screen ), and open the disc cover by pressing the OPEN knob.
3. Load the disc and close the door lid.
4. Switch on the unit by sliding the power switch (OFF/ON) to ON.
5. Adjust the volume to your desired level.
Access the GENERAL SET-UP by pressing the "SET-UP" key on the unit or remote control.
1. TV Display
NORMAL / PS – If you want the movie to fill the entire screen of your TV.
NORMAL / LB – If you want to see movies in their original aspect ratio.
The movie might appear with black bars at the top and bottom of the screen.
Wide – If your DVD player is connected to a wide screen TV.
2. TV Type
Select the TV Video output format to match your TV.

BASIC SET-UP

SYSTEM SET-UP

- 10 -