Area Code; Divx ® Registration Code; Recording Settings; Record Mode Set - Hitachi DV-DS253E Instruction Manual

If you forget your 4-digit code
If you forget your password, to clear the current
password, follow the procedure below.
1. Press SETUP to display the Setup menu.
2. Use the Number buttons to enter the 6-digit number
"210499".
3. Select [Yes] then press ENTER. The 4-digit
password is cleared. Enter a new code.

Area Code

Enter the code of an area whose standards were used
to rate the DVD video disc, referring to the list (see
"Area Codes" on page 61).
1. Select [Area Code] option then press
2. Enter the password.
3. Follow step 2 as shown "Rating".
4. Select the first character using the
buttons.
5. Shift the cursor using
second character using
6. Press ENTER to confirm your area code selection,
then press SETUP to exit the menu.
Note:
There is no password set under the default factory
settings.
®
DivX Registration Code
We provide you the DivX
registration code that allows you to rent and purchase
videos using the DivX
information, visit www.divx.com/vod.
1. Select [DivX Reg. Code] option then press
2. Press ENTER while [View] is selected and the
registration code will appear.
3. Use the registration code to purchase or rent the
videos from DivX
vod. Follow the instructions and download the video
onto a disc for playback on this unit.
Note:
All the downloaded videos from DivX
be played back on this unit.
24
.
/
buttons and select the
/ buttons.
DivX
®
VOD (Video On Demand)
®
VOD service. For more
®
VOD service at www.divx.com/
®
VOD can only

Recording Settings

Record Mode Set

You can set the picture quality for recording;
XP (High Quality), SP (Standard Quality),
LP (Low Quality), EP (Extend Quality).
1. Select [Rec Mode Set] option then press
2. Use /
SP, LP or EP).
3. Press ENTER to confirm your selection, then press
SETUP to exit the menu.

Record Aspect

When DVD recording, you can set the recording aspect
ratio to suit the material you're recording (16:9 or 4:3).
Set [Rec Aspect] to match the aspect ratio of your TV.

DV Recording Audio

You need to set this if you have a camcorder using
32kHz/12-bit sound connected to the front panel DV IN
jack.
Some digital camcorders have two stereo tracks for
.
audio. One is recorded at the time of shooting; the
other is for overdubbing after shooting.
On the Audio 1 setting, the sound that was recorded
while shooting is used.
On the Audio 2 setting, the overdubbed sound is used.

TV Recording Audio

When TV recording with bilingual, you can choose
audio channel to record.
[Main+Sub] Main language and Sub language
[Main] Main language only
[Sub] Sub language only
to select a desired Record Mode (XP,
.