Hitachi 22LD5750U User Manual page 43

Connection to other equipment
5. Connecting Video camera and Video recorder
Select the "MONITOR" option in the AV1 OUTPUT menu (see page 17).
Select the AV2 input mode (see P.11). You can see the playback picture from video camera.
This signal is output via AV1 and can be recorded by video recorder.
With this arrangement, Video recorder will record exactly what is shown on the screen.
Note:
• If you have a camcorder with
S-video, use an S-video cable
instead of a standard video cable.
Do not connect both a standard
video cable and an S-video cable
at the same time, or the picture
performance will be unacceptable.
6. Connecting to a DVD player or other AV device with Component Video outputs
If your DVD player (or other device) has Component Video output jacks, use a suitable set of leads (RCA/
Phono) to connect these to the Component Video inputs on this TV as shown - it can greatly enhance
the picture quality and performance. Please remember that you will also need to connect separate leads
(RCA/Phono) for the audio signals. Select the COMPONENT input mode (see P.11).
TV (Back side view)
To COMPONENT IN
Note:
• The Component Video input of this unit are for use with equipment which outputs interlaced signals (PAL:
576i/1080i or NTSC: 480i/1080i) and progressive signals (PAL: 576p/720p or NTSC: 480p/720p).
TV (Back side view)
TV (Back side view)
Audio cable
(not supplied)
Video cable (not supplied)
(S-VIDEO cable, not supplied)
(AV cable, not supplied)
(SCART cable, not supplied)
Audio output
Component output
Video camera to AV2
Playback
AV output
Video recorder to AV1
Recording
DVD player
Y Pb Pr
43