Channel List; Navigating Channel List; Deleting Channel; Edit Channels - Hitachi HDR253 Instruction Manual

1. CHANNEL LIST

Channel list is the place where the
channels are managed. The following
operations can be performed in this
menu:

1. Navigating channel list

2. Deleting channels
3. Renaming channels

4. Adding locks to channels

5. Setting favourite list
1.1. NAVIGATING CHANNEL LIST
In the channel table " / " moves the selection to the previous or next .To exit menu and watch a
specific channel highlight it using, " / " then press OK key while the "SELECT" option at the bottom
of the screen is highlighted. If the selected channel is password protected then a pop up menu is
displayed. If the correct code is entered, the selected channel can be watched. You can now select
another channel in the list. The scroll Bar in middle of the screen shows relative position of the
currently visible channels with respect to the whole list.

1.2. DELETING CHANNEL

To delete a channel highlight it using " / ", then highlight the "Delete" button using " / "and press
OK. A message is displayed to confirm your decision, if you still want to delete select "YES", with the
< > buttons or the operation will be cancelled if you select "NO".

1.3. EDIT CHANNELS

To rename a specific channel, highlight "Edit Name" button after the channel is selected and press
OK. A box appears on the screen. " / " moves to the previous/next character. " / " toggles the
current character, i.e., 'b' character becomes 'a' on " " and 'c' on " ". Pressing the numeric buttons
'0...9' replaces the highlighted character with the characters printed above the button one by one as
the button is pressed. Pressing BACK cancels the editing and OK saves the new name.
1.4. ADDING LOCKS TO CHANNELS
Channel Locking provides a password-protected access to channels selected by parents. In order to
lock a channel you should know the parental Lock password (set to 0000 in the factory and can only
be changed from the Configuration Menu), from the channel list menu highlight the channel to be
locked and select the "Lock" button with the < > keys, when OK is pressed a password box is
displayed. Enter the parental Lock code, press OK and the Lock icon will be displayed in front of the
selected channel. Repeat the same operation to cancel the Lock.
16