Image Mode Selection - Canon LV-7297M User Manual

Direct Operation
Select the desired image mode among
Presentation, Standard, High contrast,
Cinema, Blackboard (Green), Colorboard,
User 1, User 2, User 3 and User 4 by pressing
the IMAGE button on the remote control unit.
Menu Operation
1
Press the MENU button to display the
On-Screen Menu. Use the Point ▲▼
buttons to select Image select and then
press the Point ► or the OK button.
2
Use the Point ▲▼ buttons to select the
desired item and then press the OK button.
Presentation
For viewing pictures in a bright room.
Standard
Normal picture mode preset on the
projector.
High contrast
Picture mode with improved halftone for
graphics.
Cinema
Picture mode adjusted with fine tone.
Blackboard (Green)
For the image projected on a blackboard.
This mode helps enhance the image projected
on a blackboard. This is mainly effective on a
green colored board, not truly effective on a
black colored board.
Colorboard
At the time of simple projection on the colored
wall, you can get the close color image to the
color image projected on a white screen by
selecting the similar color to the wall color from
the preset four colors.
Use the Point ▲▼ buttons to select
Colorboard and then press the Point ► or the
OK button to access the submenu. Press the
Point ▲▼ buttons to select items among Red,
Blue, Yellow and Green.
User 1-4
For viewing with the user preset image mode
in the Image Adjust Menu (see page 36).
Image Mode Selection
Remote control unit
Image select Menu
Computer Input
IMAGE button
LV-RC06
IMAGE button
Presentation
Standard
High contrast
Cinema
Blackboard (Green)
Colorboard
User 1
User 2
User 3
User 4
35