Use The Usb; Setting The Clock - Hitachi AX-M138 Instruction Manual

Advanced Display (FM)
1. In the current station screen, press and hold the INFO button for 2 seconds, and System Reset will be
shown:
2. Press the INFO button again, Software Version will be shown:
Radio Mode
When the unit is the Radio Mode, by following the instruction in last section (Advance Display), you can
select the MONO or Auto Mode (Stereo) by pressing the SELECT button
98.10
MONO

Use the USB

You can connect the USB flash to the USB jack at the front panel of unit. The unit will play MP3 music from the flash
directly:
1. Plug the USB flash into the USB jack
2. Press the USB button on remote control or press the FUNCTION button on front panel to select the USB function
3. Display shows the word "USB"
4. MP3 music will be played automatically.

Setting the Clock

The built-in clock shows the correct time in the display.
- In standby mode, press the clock button (CLOCK) twice, the hour indicator will blink.
- Set the hour with the VOL- button or VOL+ button.
- Press the clock button (CLOCK), the minute indicator will blink.
- Set the minute with the VOL- button or VOL+ button.
- Press the clock button (CLOCK), the built-in clock starts operating and the seconds start
counting from 0.
98.10
RESET
98.10
SW/AJ1-00
MONO
MODE
Press SELECT
- 22 -
AUTO
MODE
Press SELECT