Hitachi CP-X306 User's Manual And Operating Manual
  1. Manuals
  2. Brands
  3. Hitachi Manuals
  4. Projector
  5. CP-X306
  6. User's manual and operating manual
Hitachi CP-X306 User's Manual And Operating Manual

Hitachi CP-X306 User's Manual And Operating Manual

Hide thumbs Also See for CP-X306:
Table of Contents

Advertisement

Quick Links

See also: User Manual , Network Manual
Projector
CP-X206/CP-X306
User's Manual (detailed)
Operating Guide
Thank you for purchasing this projector.
WARNING
WARNING
CAUTION
NOTE
Trademark acknowledgment
1

Advertisement

Table of Contents
loading

Related Manuals for Hitachi CP-X306

Summary of Contents for Hitachi CP-X306

  • Page 1 Projector CP-X206/CP-X306 User's Manual (detailed) Operating Guide Thank you for purchasing this projector. WARNING WARNING CAUTION NOTE Trademark acknowledgment...
  • Page 2 Read this Safety Guide first. Projector User's Manual - Safety Guide Thank you for purchasing this projector. WARNING • Before using, read these user's manuals of this projector to ensure correct usage through understanding. After reading, store them in a safe place for future reference.

  • Page 3: Safety Precautions

    Safety Precautions WARNING Never use the projector if a problem should occur. Abnormal operations such as smoke, strange odor, no image, no sound, excessive sound, damaged casing or elements or cables, penetration of liquids or foreign matter, etc. can cause a fire or electrical shock. In such case, immediately turn off the power switch and then disconnect the power plug from the power outlet.
  • Page 4 Safety Precautions (continued) WARNING Be cautious of High temperatures of the projector. High temperatures are generated when the lamp is lit. It could result in fire or burn. Use special caution in households where children are present. Do not touch about the lens, air fans and ventilation openings during use or immediately after use, to prevent a burn.
  • Page 5 Safety Precautions (continued) WARNING Be careful in handling the light source lamp. The projector uses a high-pressure mercury glass lamp made of glass. The lamp can break with a loud bang, or burn out. When the bulb bursts, it is possible for shards of glass to fly into the lamp housing, and for gas containing mercury to escape from the projector’s vent holes.
  • Page 6 Safety Precautions (continued) CAUTION Be careful in moving the projector. Neglect could result in an injury or damage. • Do not move the projector during use. Before moving, disconnect the power cord and all external connections, and close the slide lens door or attach the lens cap.
  • Page 7 Safety Precautions (continued) CAUTION Remove the power cord for complete separation. • For safety purposes, disconnect the power cord if the projector is not to be used for prolonged periods of time. Disconnect the • Before cleaning, turn off and unplug the projector. Neglect could result in plug from the fire or electrical shock.
  • Page 8 Safety Precautions (continued) NOTE About consumables. Lamp, LCD panels, polarizors and other optical components, and air filter and cooling fans have a different lifetime in each. These parts may need to be replaced after a long usage time. • This product isn’t designed for continuous use of long time. In the case of continuous use for 6 hours or more, or use for 6 hours or more every day (even if it isn’t continuous), or repetitious use, the lifetime may be shortened, and these parts may need to be replaced even if one year has not passed since the beginning of using.
  • Page 9 Lamp WARNING HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them.

  • Page 10: Regulatory Notices

    Regulatory Notices FCC Statement Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

  • Page 11: Table Of Contents

    Contents About this manual... 1 PICTURE menu ... . 26 RIGHTNESS ONTRAST AMMA Contents ....2 OLOR TEMP OLOR HARPNESS...

  • Page 12: Contents Of Package

    Projector features / Preparations Contents of package NOTE Fastening the lens cover...

  • Page 13: Part Names

    Part names HOT! Projector HOT! AC IN WARNING HOT! CAUTION...

  • Page 14: Control Panel

    Part names Control panel STANDBY/ON 16, 22 INPUT MENU 15, 67 POWER TEMP LAMP Rear panel AUDIO IN1 AUDIO IN2 COMPONENT AUDIO OUT Y Cb Pb Cr Pr COMPUTER IN1 VIDEO COMPUTER IN2 S-VIDEO MONITOR OUT AUDIO IN3 (L,R) CONTROL BATTERY CAUTION...
  • Page 15 Part names Remote control VIDEO COMPUTER SEARCH MY SOURCE/ COMPUTER VIDEO DOC.CAMERA STANDBY/ON ASPECT AUTO SEARCH BLANK ASPECT MAGNIFY FREEZE PAGE VOLUME AUTO DOWN BLANK KEYSTONE MY BUTTON MUTE MAGNIFY - ON 14, 20 MAGNIFY - OFF MENU MY SOURCE/DOC.CAMERA POSITION VOLUME - ENTER...

  • Page 16: Setting Up

    Setting up Arrangement <CP-X206> On a horizontal surface Suspended from the ceiling • • Screen size Projection distance Projection distance Screen Screen Screen Screen (diagonal) height height height height inch inch inch inch inch inch inch inch inch 122 103 126 123 138 116 140 137...
  • Page 17 Setting up Arrangement (continued) <CP-X306> On a horizontal surface Suspended from the ceiling • • Screen size Projection distance Projection distance Screen Screen Screen Screen (diagonal) height height height height inch inch inch inch inch inch inch inch inch 125 103 129 123 141 116 144 137...
  • Page 18 Setting up Arrangement (continued) WARNING CAUTION...

  • Page 19: Connecting Your Devices

    Setting up Connecting your devices Monitor AUDIO OUT RS-232C RGB OUT AUDIO OUT RGB OUT RGB IN Speakers (with an AUDIO IN VCR/DVD VIDEO OUT AUDIO OUT AUDIO OUT AUDIO OUT S-VIDEO OUT COMPONENT VIDEO OUT player WARNING CAUTION...
  • Page 20 Setting up Connecting your devices (continued) NOTE About Plug-and-Play capability COMPUTER IN1...
  • Page 21 Setting up Connecting power supply AC IN AC IN WARNING Using the security bar and slot WARNING CAUTION NOTE...

  • Page 22: Remote Control

    Remote control Installing the batteries (HITACHI MAXELL, Part No.LR6 or R6P) WARNING About the remote control signal 30º 30º NOTE...

  • Page 23: Changing The Frequency Of Remote Control Signal

    Remote control Changing the frequency of remote control signal MY SOURCE/ COMPUTER VIDEO DOC.CAMERA ASPECT AUTO SEARCH BLANK MAGNIFY FREEZE PAGE VOLUME DOWN KEYSTONE MY BUTTON MUTE VOLUME - RESET MAGNIFY OFF POSITION MENU ENTER RESET Using as a simple PC mouse & keyboard (1) PAGE UP key: PAGE UP (2) PAGE DOWN key:...

  • Page 24: Power On/Off

    Power on/off STANDBY/ON Turning on the power POWER POWER STANDBY/ON MY SOURCE/ COMPUTER VIDEO DOC.CAMERA ASPECT AUTO SEARCH BLANK MAGNIFY FREEZE PAGE VOLUME DOWN POWER KEYSTONE MY BUTTON MUTE POSITION MENU ENTER RESET Turning off the power STANDBY/ON STANDBY/ON POWER POWER 67).

  • Page 25: Operating

    Operating VOLUME + - Adjusting the volume VOLUME + VOLUME - MY SOURCE/ COMPUTER VIDEO DOC.CAMERA ASPECT AUTO SEARCH BLANK FREEZE PAGE VOLUME MAGNIFY DOWN KEYSTONE MY BUTTON MUTE POSITION MENU Temporarily muting the sound MUTE MUTE MUTE VOLUME + VOLUME - MY SOURCE/ COMPUTER...

  • Page 26: Searching An Input Signal

    Operating Selecting an input signal (continued) VIDEO VIDEO MY SOURCE/ VIDEO COMPUTER DOC.CAMERA ASPECT AUTO SEARCH BLANK MAGNIFY FREEZE PAGE VOLUME DOWN KEYSTONE MY BUTTON MUTE VIDEO COMPUTER IN1 COMPUTER IN2 COMPONENT SEARCH Searching an input signal SEARCH MY SOURCE/ VIDEO COMPUTER DOC.CAMERA...
  • Page 27 Operating Adjusting the projector's elevator CAUTION Adjusting the zoom and focus...

  • Page 28: Using The Automatic Adjustment Feature

    Operating Using the automatic adjustment feature AUTO AUTO MY SOURCE/ For a computer signal COMPUTER VIDEO DOC.CAMERA ASPECT AUTO SEARCH BLANK FREEZE PAGE VOLUME MAGNIFY DOWN KEYSTONE MY BUTTON MUTE POSITION MENU For a video signal and s-video signal For a component video signal Adjusting the position POSITION KEYSTONE...

  • Page 29: Correcting The Keystone Distortions

    Operating KEYSTONE Correcting the keystone distortions MAGNIFY FREEZE PAGE VOLUME KEYSTONE DOWN KEYSTONE MY BUTTON MUTE KEYSTONE MAGNIFY Using the magnify feature ON/OFF MAGNIFY MY SOURCE/ VIDEO COMPUTER DOC.CAMERA ASPECT AUTO SEARCH BLANK MAGNIFY MAGNIFY FREEZE PAGE VOLUME DOWN KEYSTONE MY BUTTON MUTE POSITION...
  • Page 30 Operating Freezing the screen FREEZE FREEZE MY SOURCE/ VIDEO COMPUTER DOC.CAMERA ASPECT AUTO SEARCH BLANK MAGNIFY FREEZE PAGE VOLUME DOWN KEYSTONE MY BUTTON MUTE FREEZE POSITION MENU Temporarily blanking the screen BLANK BLANK MY SOURCE/ COMPUTER VIDEO DOC.CAMERA ASPECT AUTO SEARCH BLANK FREEZE...

  • Page 31: Using The Menu Function

    Operating Using the menu function MENU INPUT ENTER MENU POSITION MENU ENTER RESET RESET MENU POSITION MENU In the EASY MENU...
  • Page 32 Operating Using the menu function (continued) In the Advanced Menu ENTER ENTER RESET MENU...

  • Page 33: Easy Menu

    EASY MENU Item Description ASPECT AUTO KEYSTONE EXECUTE KEYSTONE PICTURE MODE...
  • Page 34 EASY MENU EASY MENU (continued) Item Description BRIGHTNESS CONTRAST COLOR TINT SHARPNESS WHISPER MIRROR RESET FILTER TIME LANGUAGE Go to ENTER Advanced Menu...
  • Page 35 PICTURE menu ENTER Item Description BRIGHTNESS CONTRAST #1 DEFAULT #1 CUSTOM #2 DEFAULT #2 CUSTOM #3 DEFAULT #6 CUSTOM #3 CUSTOM #6 DEFAULT #5 CUSTOM #5 DEFAULT #4 CUSTOM #4 DEFAULT To adjust CUSTOM ENTER GAMMA ENTER ENTER...

  • Page 36: Picture Menu

    PICTURE menu PICTURE menu (continued) Item Description #1 HIGH #1 CUSTOM #2 MID #2 CUSTOM #6 CUSTOM #3 LOW #6 Hi-BRIGHT-3 #3 CUSTOM #5 CUSTOM #5 Hi-BRIGHT-2 #4 CUSTOM #4 Hi-BRIGHT-1 To adjust CUSTOM ENTER COLOR TEMP ENTER ENTER COLOR TINT...

  • Page 37: My Memory

    PICTURE menu PICTURE menu (continued) Item Description SHARPNESS ENTER LOAD-1, LOAD-2, LOAD-3, LOAD-4 MY MEMORY MY BUTTON SAVE-1, SAVE-2, SAVE-3, SAVE-4...
  • Page 38 IMAGE menu ENTER Item Description For a computer signal For a Video signal, S-video signal or Component video signal ASPECT For no signal OVER SCAN V POSITION RESET above...

  • Page 39: Image Menu

    IMAGE menu IMAGE menu (continued) Item Description RESET H POSITION H PHASE H SIZE RESET For a computer signal For a video signal and s-video signal AUTO ADJUST EXECUTE For a component video signal...
  • Page 40 INPUT menu ENTER Item Description VIDEO S-VIDEO PROGRESSIVE COMPONENT VIDEO NR VIDEO S-VIDEO COMPONENT COLOR SPACE COMPONENT Y Cb Pb Cr Pr COMPONENT COMPONENT Y Cb Pb Cr VIDEO...

  • Page 41: Input Menu

    INPUT menu INPUT menu (continued) Item Description S-VIDEO VIDEO VIDEO FORMAT VIDEO S-VIDEO FRAME LOCK COMPUTER IN1 COMPUTER IN...
  • Page 42 INPUT menu INPUT menu (continued) Item Description COMPUTER IN1 ENTER RESOLUTION...
  • Page 43 SETUP menu ENTER Item Description AUTO KEYSTONE EXECUTE KEYSTONE...
  • Page 44 SETUP menu SETUP menu (continued) Item Description WHISPER MIRROR STANDBY MODE below MONITOR OUT AUDIO OUT MONITOR OUT MONITOR OUT MONITOR OUT MONITOR OUT COMPUTER IN MONITOR OUT...

  • Page 45: Component

    AUDIO menu ENTER Item Description VOLUME SPEAKER AUDIO OUT AUDIO AUDIO IN VIDEO S-VIDEO COMPONENT...
  • Page 46 SCREEN menu ENTER Item Description LANGUAGE MENU POSITION MENU BLANK BLANK...

  • Page 47: Screen Menu

    SCREEN menu SCREEN menu (continued) Item Description below START UP ENTER RESET MyScreen ENTER RESET...
  • Page 48 SCREEN menu SCREEN menu (continued) Item Description MyScreen below MyScreen Lock MESSAGE...
  • Page 49 SCREEN menu SCREEN menu (continued) Item Description ENTER INPUT RESET SOURCE NAME ENTER INPUT ENTER INPUT ENTER INPUT ENTER INPUT MY BUTTON TEMPLATE...
  • Page 50 OPTION menu ENTER Item Description AUTO SEARCH AUTO KEYSTONE AUTO ON...

  • Page 51: Option Menu

    OPTION menu OPTION menu (continued) Item Description AUTO OFF CONTROL RESET LAMP TIME RESET FILTER TIME...
  • Page 52 OPTION menu OPTION menu (continued) Item Description MY BUTTON 1 MY BUTTON MY BUTTON MY BUTTON MY SOURCE/DOC.CAMERA MY SOURCE ENTER SERVICE...
  • Page 53 OPTION menu OPTION menu (continued) Item Description FAN SPEED AUTO ADJUST SERVICE GHOST FILTER MESSAGE...
  • Page 54 OPTION menu OPTION menu (continued) Item Description KEY LOCK STANDBY/ON REMOTE FREQ. INFORMATION SERVICE COMPONENT FACTORY RESET RESET...
  • Page 55 OPTION menu OPTION menu (continued) Item Description 1. Using Security Features 1.1 Inputting the PASSWORD 6971 below SECURITY 1.2 Changing the PASSWORD ENTER...
  • Page 56 OPTION menu OPTION menu (continued) Item Description 1.3 If you have forgotten your PASSWORD RESET INPUT 2. Using the MyScreen PASSWORD Function SECURITY PASSWORD 2.1 Turning on the MyScreen Function 2.2 Setting the PASSWORD...
  • Page 57 OPTION menu OPTION menu (continued) Item Description ENTER 2.3 Turning the PASSWORD off SECURITY 2.4 If you have forgotten your PASSWORD 3. Using the PIN LOCK Function 3.1 Registering the PIN Code ENTER...
  • Page 58 OPTION menu OPTION menu (continued) Item Description COMPUTER INPUT SECURITY 3.2 Turning Off the PIN LOCK Function 3.3 If you have forgotten your PIN Code RESET INPUT...
  • Page 59 OPTION menu OPTION menu (continued) Item Description 4. Using the Transition Detector Function Transition Detector 4.1 Turning On the Function ENTER SECURITY Transition Detector 4.2 Setting the PASSWORD ENTER...
  • Page 60 OPTION menu OPTION menu (continued) Item Description ENTER 4.3 Setting the Transition Detector off SECURITY 4.4 If you have forgotten your PASSWORD...
  • Page 61 OPTION menu OPTION menu (continued) Item Description 5. Using the MY TEXT PASSWORD function 5.1 Writing the MY TEXT ENTER INPUT RESET ENTER INPUT ENTER INPUT SECURITY ENTER INPUT ENTER INPUT 5.2 Displaying the MY TEXT...
  • Page 62 OPTION menu OPTION menu (continued) Item Description 5.3 Turning on the MY TEXT PASSWORD SECURITY ENTER INPUT...
  • Page 63 NETWORK Menu ENTER NOTE Date/Time Settings of the User’s Manual - Network Guide) Item Description ENTER SETUP DHCP (Dynamic Host Protocol)

  • Page 64: Network Menu

    NETWORK Menu NETWORK Menu (continued) Item Description ADDRESS SUBNET MASK DEFAULT GATEWAY SETUP SERVER TIME DIFFERENCE DATE TIME Date/Time Settings of the User’s Manual - Network Guide)
  • Page 65 NETWORK Menu NETWORK Menu (continued) Item Description ENTER INPUT RESET ENTER INPUT PROJECTOR NAME ENTER INPUT ENTER INPUT ENTER INPUT...
  • Page 66 NETWORK Menu NETWORK Menu (continued) Item Description MY IMAGE (Still Image Transfer) Display of the User’s Manual - Network Guide) ENTER To switch the image displayed MY IMAGE To return to the menu RESET ENTER INPUT...

  • Page 67: Information

    NETWORK Menu NETWORK Menu (continued) Item Description INFORMATION SERVICE...

  • Page 68: Closed Caption) Menu

    C.C. (Closed Caption) menu Item Description DISPLAY MODE CHANNEL...

  • Page 69: Maintenance

    Maintenance Replacing the lamp Type number : DT00911 Replacing the lamp In case of replacement by yourself, follow the following procedure. MENU CAUTION NOTE...

  • Page 70: Lamp Warning

    Maintenance Replacing the lamp (continued) Lamp warning HIGH TEMPERATURE HIGH PRESSURE HIGH VOLTAGE WARNING About disposal of a lamp:...
  • Page 71 Maintenance Type number : MU05611...
  • Page 72 Maintenance MENU WARNING NOTE...
  • Page 73 Maintenance Replacing the internal clock battery HITACHI MAXELL CR2032. NOTE WARNING...

  • Page 74: Other Care

    Maintenance Other care Inside of the projector Caring for the lens Caring for the cabinet and remote control WARNING CAUTION...

  • Page 75: Troubleshooting

    Troubleshooting WARNING Related messages Message Description There is no input signal. The horizontal or vertical frequency of the input signal An improper signal is input. The internal temperature is rising.

  • Page 76: Regarding The Indicator Lamps

    Troubleshooting Regarding the indicator lamps LAMP TEMP POWER POWER LAMP TEMP Description indicator indicator indicator The projector is in a standby state. Orange Blinking The projector is warming up. Green The projector is in an on state. Green Blinking The projector is cooling down. Orange The projector is cooling down.

  • Page 77: Shutting The Projector Down

    Troubleshooting Regarding the indicator lamps (continued) POWER LAMP TEMP Description indicator indicator indicator There is a possibility that the interior portion has become heated. Blinking blinking in Green There is a possibility that the interior portion has become overcooled. blinking in Green At least 1 Power ON schedule is saved to the Green...

  • Page 78: Phenomena That May Be Easy To Be Mistaken For Machine Defects

    Troubleshooting Phenomena that may be easy to be mistaken for machine defects Reference Phenomenon Cases not involving a machine defect page The electrical power cord is not plugged in. The main power source has been interrupted during operation such as by a power outage (blackout), etc. Either there is no lamp and/or lamp cover, or either The signal cables are not correctly connected.
  • Page 79 Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Reference Phenomenon Cases not involving a machine defect page The signal cables are not correctly connected. The MUTE function is working. MUTE VOLUME + - The AUDIO/SPEAKER setting is not correct. The lens cover is attached.
  • Page 80 Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Reference Phenomenon Cases not involving a machine defect page The FREEZE function is working. FREEZE Color settings are not correctly adjusted. COLOR SPACE setting is not suitable. The brightness and/or contrast are adjusted to an The WHISPER function is working.
  • Page 81 Item <CP-X206> <CP-X306> Computer input port Computer output port Video input port Audio input/output port Others Lamp...
  • Page 82 BATTERY...
  • Page 83 Projector CP-X206/CP-X306 User's Manual (detailed) Network Guide Thank you for purchasing this projector. This projector has the network function that brings you the following main features. Web control MY IMAGE (Still Image Transfer) Display WARNING • The information in this manual is subject to change without notice. NOTE •...

  • Page 84: About This Manual

    Content About this manual................1 Content ..................2 1. Main functions ................3 ........... 3 ........... 3 2. Equipment connection and network setting......4 ..............4 2.2 Manual network connection setting............. 5 ................. 5 ..................5 ................. 8 .................. 9 3.

  • Page 85: Main Functions

    1. Main functions 1. Main functions 1.2 MY IMAGE (Still image Transfer) Display...

  • Page 86: Equipment Connection And Network Setting

    2. Equipment connection and network setting 2.1 Required equipment preparation the network. • The system for using the network function of the projector requires NOTE SETUP Menu in the User’s Manual (detailed) – Operating Guide...

  • Page 87: Manual Network Connection Setting

    2. Equipment connection and network setting 2.2 Manual network connection setting 2.2.1 Equipments connection 2.2.2 Network settings...
  • Page 88 2. Equipment connection and network setting 2.2 Manual network connection setting (continued)
  • Page 89 2. Equipment connection and network setting 2.2 Manual network connection setting (continued) [About IP address] NOTE via a web browser. (...
  • Page 90 2. Equipment connection and network setting 2.2 Manual network connection setting (continued) 2.2.3 “Internet Option” setting Click Click...
  • Page 91 2. Equipment connection and network setting 2.2 Manual network connection setting (continued) 2.2.4 Check connection...

  • Page 92: Management With Web Browser Software

    3. Management with Web browser software browser software. You can change the settings of or control the projector via a network by using a E-mail Alerts Projector Management using SNMP MY IMAGE (Still Image Transfer) Display...
  • Page 93 3. Management with Web browser software browser NOTE...
  • Page 94 3. Management with Web browser software Item Description Administrator User Network Information Network Settings settings. Port Settings communication port settings. Mail Settings Alert Settings warning alerts. Schedule Settings settings. Date/Time Settings time settings. Security Settings Projector Control Projector Status Network Restart connection.

  • Page 95: Logon

    3. Management with Web browser software 3.1.1 Logon Example 192.168.1.10 “http://192.168.1.10/” key or click “ [Logon]. Item Password <blank> <blank> Main menu Main menu...

  • Page 96: Part Names 4

    3. Management with Web browser software 3.1.2 Network Information Any functions that are available only for the Item Description Projector Name DHCP IP Address Subnet Mask Default Gateway MAC Address Firmware Date Firmware Version...
  • Page 97 3. Management with Web browser software 3.1.3 Network Settings Item Description DHCP ON DHCP OFF IP Address Subnet Mask Default Gateway Projector Name The length of the sysLocation can be up to 255 alphanumeric sysLocation (SNMP) sysContact (SNMP) DNS Server Address [Apply] button to save the settings.
  • Page 98 3. Management with Web browser software NOTE restart the network connection. You can restart the network connection by clicking [Network Restart] on the main menu.

  • Page 99: Port Settings

    3. Management with Web browser software 3.1.4 Port Settings Item Description Network Control Port1 (Port:23) Port open [Enable] [Enable] Authentication this port. Network Control Port2 (Port:9715) Port open [Enable] [Enable] Authentication this port. Image Transfer Port (Port:9716) Port open [Enable] [Enable] Authentication for this port.

  • Page 100: Mail Settings

    3. Management with Web browser software 3.1.5 Mail Settings Item Description [Enable] Send mail Settings. SMTP Server IP Address Network Settings to 255 characters. Sender E-mail address alphanumeric characters. can also specify [TO] or [CC] Recipient E-mail address characters. [Apply] button to save the settings. NOTE [Send Test Mail]...

  • Page 101: Alert Settings

    3. Management with Web browser software 3.1.6 Alert Settings Alert Item Description Cover Error The cooling fan is not operating. Fan Error Lamp Error There is a possibility that the interior portion has become Temp Error The internal temperature is rising. Air Flow Error Lamp time over.
  • Page 102 3. Management with Web browser software Setting Item Description Alarm Time Lamp Time Alarm Filter Time Alarm SNMP Trap [Enable] [Enable] Send Mail Cold Start Authentication Failure The length of the subject line can be up to 100 alphanumeric Mail Subject characters.
  • Page 103 3. Management with Web browser software 3.1.7 Schedule Settings Item Description Daily Sunday Monday Tuesday Wednesday Thursday Friday Saturday...
  • Page 104 3. Management with Web browser software Item Description Schedule [Enable] Date (Month/Day) [Apply] button to save the settings. Item Description Time Command [Parameter] Power Input Source Display Image [Register] [Delete] [Reset] NOTE...
  • Page 105 3. Management with Web browser software 3.1.8 Date/Time Settings Item Description year/month/day format. Current Date hour:minute:second format. Current Time [ON] Daylight Savings Time the following items. Start Month Week hour Time minute Month Week hour Time minute...
  • Page 106 3. Management with Web browser software Item Description Time difference manager. [ON] SNTP SNTP Server IP Network Address Settings to 255 characters. Cycle hour : minute [Apply] button to save the settings. NOTE restart the network connection. You can restart the network connection by clicking [Network Restart] on the main menu.

  • Page 107: Security Settings

    3. Management with Web browser software 3.1.9 Security Settings Item Description Administrator authority Administrator ID characters. Administrator Password characters. Re-enter Administrator Password User authority User ID characters. User Password characters. Re-enter User Password...
  • Page 108 3. Management with Web browser software Item Description Network Control control. Authentication Password Re-enter Authentication Password SNMP Community name be up to 64 alphanumeric characters. [Apply NOTE restart the network connection. You can restart the network connection by clicking [Network Restart] on the main menu.
  • Page 109 3. Management with Web browser software 3.1.10 Projector Control The items shown in the table below can be Most of the items have a submenu. Refer to the • The setting value may not match with the actual value if the user NOTE [Refresh] button.

  • Page 110: Video

    3. Management with Web browser software Item Description Image Selects the aspect setting. Aspect Over Scan V Position H Position H Phase H Size Auto Adjust Execute Input Selects the progressive setting. Progressive Video NR Selects the color space. Color Space Selects the COMPONENT port setting.

  • Page 111: Search

    3. Management with Web browser software Item Description Audio Volume Speaker COMPUTER IN1 input port. Audio-Computer1 COMPUTER IN2 input port. Audio-Computer2 COMPONENT input port. Audio-Component -S-VIDEO input port. Audio-S-Video -VIDEO input port. Audio-Video Assigns the AUDIO OUT Audio Out Standby Screen Language Menu Position V...

  • Page 112: Projector Status

    3. Management with Web browser software 3.1.11 Projector Status Item Description Error Status Lamp Time Filter Time Power Status Input Status Blank On/Off Mute Freeze...

  • Page 113: Logoff

    3. Management with Web browser software 3.1.12 Network Restart Item Description Restart NOTE [Restart] button to log on again. • The Logon menu ( 3.1.13 Logoff [Logoff]...
  • Page 114 3. Management with Web browser software 3.2 E-mail Alerts NOTE power. Mail Settings ( through a web browser. “http://192.168.1.10/” [Logon]. [Port Settings] on the main menu. [Enable] [Apply] button to save the settings. NOTE SMTP Port [Network Restart] items. [Mail Settings] the item 3.1.5 Mail Settings ( [Apply] button to save the settings.
  • Page 115 3. Management with Web browser software 3.2 E-mail Alerts (continued) [Alert Settings] the item 3.1.6 Alert Setting [Apply] button to save the settings.

  • Page 116: Projector Management Using Snmp

    3. Management with Web browser software 3.3 Projector Management using SNMP to use this function. NOTE SNMP Settings ( “http://192.168.1.10/” [Logon]. [Port Settings] on the main menu. [Enable] SNMP Port NOTE SNMP Port [Network Restart] following items. [Security Settings] on the main menu. [SNMP] Community name has been NOTE...
  • Page 117 3. Management with Web browser software NOTE...
  • Page 118 3. Management with Web browser software Schedule Settings ( “http://192.168.1.10/” [Logon]. [Schedule Settings] select [Sunday]. [Enable] [Apply] button to save the settings. [Register] new event. [Delete] NOTE when the projector gets is receiving the power.
  • Page 119 3. Management with Web browser software Date/Time Settings ( “http://192.168.1.10/” [Logon]. [Date/Time Settings] [Apply] button to save the settings. Daylight Savings Time or NOTE SNTP following Manual (concise).
  • Page 120 3. Management with Web browser software 3.5 MY IMAGE (Still Image Transfer) Display NETWORK Menu in User’s Manual (detailed) – Operating Guide NOTE browser. Refer to...
  • Page 121 3. Management with Web browser software Example: If the IP address of the projector is set to 192.168.1.10: “http://192.168.1.10/” click [Logon]. [Port Settings] on the main menu. [Enable] Image Transfer Port (Port: 9716) [Enable] [Authentication] setting when [Apply] button to save the settings. [Security Settings] on the main menu.
  • Page 122 3. Management with Web browser software Communication Port NOTE Command Control Settings ( “http://192.168.1.10/” [Logon]. [Port Settings] on the main menu. Network Control Port1 (Port: 23) to [Enable] [Authentication] setting when [Enable] Network Control Port2 (Port: 9715) to [Enable] [Authentication] setting when [Enable] [Apply] button to save the settings.
  • Page 123 3. Management with Web browser software [Security Settings] on the main menu. [Network Control] [Apply] button to save the settings. NOTE Network Control Port1 (Port: 23), Network Control Port2 (Port: 9715) Image Transfer Port (Port: 9716). the network connection. You can restart the network connection by clicking [Network Restart] on the main menu.
  • Page 124 3. Management with Web browser software Command Format will be sent back in the event of authentication failure when authentication is <Reply in the event of an authentication error> Reply Error code Send Data format Connection Header Data length RS-232C command Check Sum 13 bytes 1 byte...
  • Page 125 3. Management with Web browser software Reply Data format Connection Reply 1 byte Connection Reply 1 byte Connection Reply Error code 2 bytes 1 byte Connection Reply Data 2 bytes 1 byte <Projector busy reply> Connection Reply Status code 2 bytes 1 byte <Authentication error reply>...
  • Page 126 3. Management with Web browser software Authentication NOTE...
  • Page 127 Projector CP-X206/CP-X306 User's Manual (detailed) Technical Example of PC signal Resolution (H x V) H. frequency (kHz) V. frequency (Hz) Rating Signal mode 720 x 400 37.9 85.0 VESA TEXT 640 x 480 31.5 59.9 VESA VGA (60Hz) 640 x 480 37.9 72.8 VESA...
  • Page 128 Initial set signals Initial set signals The following signals are used for the initial settings. The signal timing of some PC models may be different. In such case, adjust the items V POSITION and H POSITION in IMAGE menu. Back porch (B) Front porch (D) Back porch (b) Front porch (d)
  • Page 129 Connection to the ports Connection to the ports COMPUTER IN1, COMPUTER IN2, MONITOR OUT D-sub 15pin mini shrink jack terminated (positive) • H/V. sync. Signal: TTL level (positive/negative) • Composite sync. Signal: TTL level Signal Signal Video Red 10 Ground Video Green 11 (No connection) Video Blue...
  • Page 130 Connection to the ports (continued) COMPONENT VIDEO Pb/Cb, Pr/Cr RCA jack x3 • System: 480i@60, 480p@60, 576i@50, 720p@50/60, 1080i@50/60 Port Signal Pb/Cb Pr/Cr S-VIDEO Mini DIN 4pin jack Signal Ground Ground VIDEO RCA jack • System: NTSC, PAL, SECAM, PAL-M, PAL-N, NTSC4.43...
  • Page 131 Connection to the ports (continued) AUDIO IN1, AUDIO IN2 Ø3.5 stereo mini jack AUDIO IN3 RCA jack x2 AUDIO OUT Ø3.5 stereo mini jack To input SCART RGB signal; ex.: SCART connector (jack) RCA plugs SCART cable (plug) To input SCART RGB signal to the projector, use a SCART to RCA cable. Connect the plugs refer to above ex..
  • Page 132 Connection to the ports (continued) USB B type jack Signal 1 +5V 2 - Data 3 + Data 4 Ground CONTROL D-sub 9pin plug • About the details of RS-232C communication, please refer to the following page. Signal Signal Signal (No connection) (No connection) Ground...

  • Page 133: Communications Setting

    RS-232C Communication RS-232C Communication CONTROL port RS-232C cable (cross) RS-232C port of the projector of the computer - (1) (1) CD RD (2) (2) RD TD (3) (3) TD - (4) (4) DTR GND (5) (5) GND - (6) (6) DSR RTS (7) (7) RTS CTS (8)
  • Page 134 RS-232C Communication (continued) Requesting projector status (Get command) (1) Send the following request code from the PC to the projector. Header + Command data (‘02H’ + ‘00H’ + type (2 bytes) + ‘00H’ + ‘00H’) (2) The projector returns the response code ‘1DH’ + data (2 bytes) to the PC. Changing the projector settings (Set command) (1) Send the following setting code from the PC to the projector.
  • Page 135 Command Control via the Network Command Control via the Network Communication Port The following two ports are assigned for the command control. TCP #23 TCP #9715 Command Control Settings Port Settings Click the [Enable] check box to open [Network Port open Control Port1 (Port: 23)] to use TCP #23.
  • Page 136 Command Control via the Network (continued) Command Format [TCP #23] 1. Protocol Consist of header (7 bytes) + command data (6 bytes) 2. Header BE + EF + 03 + 06 + 00 + CRC_low + CRC_high 3. Command data Command data chart byte_0 byte_1...
  • Page 137 Command Control via the Network (continued) Decreasing the projector setting value (Decrement command) (1) The PC sends the following decrement code to the projector. Header + Command data (‘05H’ + ‘00H’ + type (2 bytes) + ‘00H’ + ‘00H’) (2) The projector decreases the setting value on the above setting code. (3) The projector returns the response code ‘06H’...
  • Page 138 Command Control via the Network (continued) 7. Reply Data The connection ID (the data is same as the connection ID data on the sending data format) is attached to the Network control commands reply data. ACK reply: ‘06H’ + ‘xxH’ NAK reply: ‘15H’...
  • Page 139 RS-232C communication/Network Command table RS-232C communication/Network Command table Command Data Names Operation Type Header Action Type Setting Code Power Turn off BE EF 06 00 2A D3 01 00 00 60 00 00 Turn on BE EF 06 00 BA D2 01 00 00 60 01 00...
  • Page 140 RS-232C communication/Network Command table (continued) Command Data Names Operation Type Header Action Type Setting Code User Gamma Pattern BE EF 06 00 FB FA 01 00 80 30 00 00 9 steps gray scale BE EF 06 00 6B FB 01 00 80 30 01 00...

  • Page 141: Aspect

    RS-232C communication/Network Command table (continued) Command Data Names Operation Type Header Action Type Setting Code COLOR TEMP GAIN B BE EF 06 00 8C F5 02 00 B3 30 00 00 Increment BE EF 06 00 EA F5 04 00 B3 30 00 00 Decrement...
  • Page 142 RS-232C communication/Network Command table (continued) Command Data Names Operation Type Header Action Type Setting Code OVER SCAN BE EF 06 00 91 70 02 00 09 22 00 00 Increment BE EF 06 00 F7 70 04 00 09 22 00 00 Decrement BE EF...
  • Page 143 RS-232C communication/Network Command table (continued) Command Data Names Operation Type Header Action Type Setting Code FRAME LOCK – TURN OFF BE EF 06 00 3B C2 01 00 50 30 00 00 COMPUTER1 TURN ON BE EF 06 00 AB C3 01 00 50 30 01 00...

  • Page 144: Volume

    RS-232C communication/Network Command table (continued) Command Data Names Operation Type Header Action Type Setting Code COMPUTER1 BE EF 06 00 F2 F4 01 00 B5 20 00 00 COMPUTER2 BE EF 06 00 32 F6 01 00 B5 20 04 00 MONITOR OUT - COMPONENT BE EF...
  • Page 145 RS-232C communication/Network Command table (continued) Command Data Names Operation Type Header Action Type Setting Code AUDIO-S-VIDEO AUDIO1 BE EF 06 00 D6 DD 01 00 32 20 01 00 AUDIO2 BE EF 06 00 26 DD 01 00 32 20 02 00 AUDIO3 BE EF...
  • Page 146 RS-232C communication/Network Command table (continued) Command Data Names Operation Type Header Action Type Setting Code BLANK MyScreen BE EF 06 00 FB CA 01 00 00 30 20 00 ORIGINAL BE EF 06 00 FB E2 01 00 00 30 40 00 BLUE BE EF...

  • Page 147: Freeze

    RS-232C communication/Network Command table (continued) Command Data Names Operation Type Header Action Type Setting Code MY BUTTON-1 BE EF 06 00 3A 33 01 00 00 36 00 00 COMPUTER1 BE EF 06 00 FA 31 01 00 00 36 04 00 COMPUTER2 BE EF...
  • Page 148 RS-232C communication/Network Command table (continued) Command Data Names Operation Type Header Action Type Setting Code BE EF 06 00 01 00 CLOSED CAPTION D2 62 02 37 01 00 CHANNEL BE EF 06 00 01 00 22 62 02 37 02 00 BE EF 06 00...
  • Page 149 Hitachi, Ltd. Consumer Business Group Shin-Otemachi Bldg 5f, 2-1, Otemachi 2-Chome, Chiyoda-Ku, Tokyo 100-0004 Japan HITACHI EUROPE LTD. HITACHI EUROPE S.A. Consumer Affairs Department 364, Kifissias Ave. & 1, Delfon Str. PO Box 3007 152 33 Chalandri Maidenhead Athens Berkshire SL6 8ZE...

This manual is also suitable for:

Cp-x206

Table of Contents