Table of Contents
Advertisement
4.4. Installing the Tilt and Swivel Base
The monitor is designed to be mounted to the tilt and swivel base with which
it was shipped. To install the tilt and swivel base, proceed as follows:
1. Place the monitor upside down on a smooth and stable surface.
2. The monitor bottom side contains mounting holes for the tilt and swivel
base. These holes are represented as shaded areas in Figure 4.
3. Make sure that the claws on the tilt and swivel base slips into their
corresponding mounting holes on the monitor bottom surface. Push the
tilt and swivel base all the way toward the front of the monitor until it
snaps into place.
Fig. 4. Installing the tilt and swivel base.
9
Advertisement
Table of Contents
