Subtitle; Tv Type; Tv Out; Hdmi Resolution - Hitachi HDB73 Instruction Manual

Digital terrestrial tv receiver

Table of Contents

5.3.2. SUBTITLE

Digital terrestrial television channels can broadcast with subtitles displayed on-screen for the hard-of-hearing. This

function selects the desired subtitle language and enables the automatic display of subtitles whenever subtitle

information is broadcast.Highlight the Subtitle line in the Configuration menu and use the " " or " " keys to cycle

through the disable and language options.Return NO MENU to normal TV viewing by pressing the [MENU] key.

Digital terrestrial television channels can broadcast programmes in a widescreen format . This format must be set

correctly to normal or widescreen TV's. This function tells the TV the screen format so that broadcasts are

displayed correctly. In the Configuration menu, highlight TV Type and use the " / " buttons to select 4:3, 16:9 or

Auto, depending which TV you have. This setting duplicates the settings when you first installed the STB, therefore

if you change your TV you can set the STB to match the new TV. To return to programmes press the MENU key.

The receiver can output either an RGB or CVBS signal from the TV SCART on the rear panel. Although the RGB

format results in a better quality picture, not all equipment - particularly some VCRs - can cope with an RGB signal.

This receiver can give HDMI output in 3 different resolutions: 576p, 720p,1080i from the HDMI connector on the

rear panel. In order to get best picture quality, please check the HDMI resolutions supported by your TV set and

select the most appropriate one from this menu. Note that only stored channels can be watched over HDMI, not

VCR input. This function duplicates the selection made at the time of first installation.

This function enables or disables the favourite channel list mode by

pressing " / " buttons and press OK . If there is no favourite channel, a

warning message is displayed.

Digital terrestrial television channels can broadcast simultaneous Now&Next and 7-Day electronic program.

Highlight the EPG Preference line in the Configuration menu and use the " " or " " keys to select Now&Next or

7-Day.

If selected when searching, the "Encrypted" channels will also be stored and displayed. If NO is chosen only "Free

to Air" channels will be stored.

Table of Contents