Yamaha MCX 1000 - MusicCAST - Digital Audio Server Manual page 127

Creating CDs
5 Press OPEN / CLOSE to open the disc tray, load
in the disc you want to duplicate, then press
OPEN / CLOSE again.
The follow screens appear on the on-screen display in
sequence.
6 Use / to move the cursor to "Start" and
press SELECT.
The MusicCAST server begins recording the CD to its hard
disk drive.
• When you push SELECT to cancel recording, the
MusicCAST server deletes the data that had been
transferred up to the point of cancellation.
• Due to the rules imposed by the SCMS (Serial Copy
Management System) the MusicCAST server cannot
duplicate tracks which do not allow digital copying.
7 Press OPEN/CLOSE place a new audio CD-R or
CD-RW in the disc tray, and press OPEN/CLOSE
again.
Place the CD-R or CD-RW in the disc tray in line with the disc
tray markings, recording surface down, and press OPEN/CLOSE.
If the disc you insert already has data on it, or if you insert a
non-recordable disc, the screen below appears on the on-screen
display. Place a new CD-R or CD-RW, or a CD-RW that has
been initialized (see page 89) in the disc tray.
You cannot add songs to a CD-R or CD-RW that has
already had material recorded on it. If you want to re-use a
CD-RW, initialize it (see page 89) before beginning the
recording process.
8 When you close the disc tray, the MusicCAST
server reads the information on the disc, and
then automatically begins recording the data
recorded in step 9 to it.
Use only audio CD-R or CD-RWs when recording songs
from your MusicCAST server.
86