Safety Instructions - Siemens SICLOCK GPS1000 User Manual

Hide thumbs Also See for SICLOCK GPS1000:

Table of Contents

User manual SICLOCK GPS1000

1. Safety instructions

Caution

Please observe the safety instructions on the back of the cover sheet of this documentation. You

should not expand your device unless you have read the relevant safety instructions.

If you have questions about the validity of the installation in the planned environment, please

contact your service representative.

Smooth and safe operations demand proper transport, proper storage, installation and assem-

bling as well as careful operations and maintenance.

Warning

Danger from line voltage

Connection and disconnection may only be performed by a qualified electrician!

Connect or disconnect power supply cables only when the power is turned off.

Warning

Life-threatening > 60 VDC/VAC dangerous contact voltage

Take the following safety precautions when supplying the device with a

> 60 VDC/VAC dangerous contact voltage:

Ensure that the protective conductor (PE) in the power supply cable is

connected to the PE terminal

There must be a means (main switch or circuit breaker) of

disconnecting the devices upstream in the supply system or the building installation.

Caution

Danger from lines carrying a > 60 VDC/VAC dangerous contact voltage

Ensure that connection cables carrying a > 60 VDC/VAC dangerous contact voltage are secured

against disconnection by being pulled out. Lay the cables in cable ducts or cable channels and, if

necessary, secure the cables with cable ties.

Repairs

Repairs to the device may only be performed by authorized specialists.

Warning

Unauthorized opening or improperly performed repairs can cause considerable damage to

property and/or danger to users.

Order number 2XV9450-1AR82-BA

Version 1.0

Table of Contents