D-Link DSL-G604T User Manual page 27

Step 2: Setting the Time Zone
In Step 2, you must choose the time zone that
best corresponds to the area you are living in by
using the pull down menu. Choose the
appropriate setting and click Next to go on to
Step 3.
Step 3: PPPoE/PPPoA
PPP or Point-to-Point protocol is a standard
method of establishing a network
connection/session between networked devices.
Different forms of PPP include PPPoA and
PPPoE, and they involve an authentication process
that requires a username and password to gain
access to the network. PPPoE (Point to Point
Protocol over Ethernet), as described in RFC
2516, is a method of using PPP through the
Ethernet network. PPPoA (Point to Point Protocol
over ATM) configuration requires the same basic
information as the previously discussed PPPoE
and both configuration menus are identical. To
configure the connection for PPPoE/PPPoA,
perform the steps listed below. After setting the
values listed, click the Next button to go to Step 4
of the Configuration Wizard.
DSL-G604T 54Mbps Wireless ADSL2/2+ Modem/Router Manual
Figure 3-5. Set Time Zone window
Figure 3-6. Set PPPoE window
27