Table of Contents
Advertisement
F4VA1
2. Description of the
machine
The unit described in this manual is a form finisher for pressing wet
shirts. This shirt finisher is designed for:
•
Garment manufacturing industries;
•
Large and small Industrial dry cleaners;
•
Garment finishing industries.
The shirt finisher must be utilized by only qualified personnel, who
have been specifically trained on this type of machinery.
The manufacturer does not accept any responsibility for damage
caused to persons or things due to improper, erroneous or unreason-
able utilization of the machine.
2.1. How to identify the machine
The machine is identified by a technical data plate. The plate is found
on the back of the machine, as shown in Figure 2.1. Do not alter or
modify in any way the data on the identification plate. Do not remove
the identification plate.
Figure 2.1 - Identification plate
Table 2.3 - Technical specifications
Electrical requirements
Steam inlet
Condensate return
Air inlet
Blowing motor
Suction motor
Front clamp
Steam pressure
Air pressure
Steam comsumption
Air consumption
Net/Gross Weight
Noise
Ambient temperature
F4VA1-ed3605
Description of the machine
Figure 2.2 - Machine dimensions
Type
F4VA1 50Hz
5202
F4VA1 60Hz
5202T226T
400V 3N50Hz
220V 3 60Hz
1/2"
1/2"
1/2"
1/2"
1/4"
1/4"
2,85kW
3,8 HP
0,6kW
0,8 HP
1000W
1000W
500 - 600 kPa
80 PSI
600 - 700 kPa
80 PSI
45 - 50 kg/h
100 - 110 lbs/hr
14 nl/min
0,5 cfm
270/300 kg
595/660 lbs
70 dB
70 dB
15 to 40 °C
60 to 105 °F
Description of the data in the identification plate
Serial N
5 digits serial number
Type
Product code
V
Tension
Hz
Frequency (cycles)
kW
Power absorption
Date
Date of production
2.2. Technical specifications
Refer to Table 2.3 for technical specifications.
Figure 2.1 shows the dimensions of the machine.
i
This manual describes all the versions of the machine. Be-
fore reading the manual identify the version of the ma-
chine you own by reading the machine "type" in the technical
data plate. While reading the manual take into account only
the information related to the version of machine you own.
Type
5212
400V 3N 50Hz
400V 3N 50Hz
1/2"
1/2"
1/4"
2,85kW
0,6kW
1000W
500 - 600 kPa
500 - 600 kPa
600 - 700 kPa
600 - 700 kPa
45 - 50 kg/h
45 - 50 kg/h
14 nl/min
14 nl/min
290/320 kg
300/330 kg
15 to 40 °C
15 to 40 °C
5222
5232
220V 3 60Hz
1/2"
1/2"
1/2"
1/2"
1/4"
1/4"
2,85kW
3,8 HP
0,6kW
0,8 HP
1000W
1000W
80 PSI
80 PSI
100 - 110 lbs/hr
0,5 cfm
640/705 lbs
60 to 105 °F
5
Advertisement
Table of Contents
