Switching on/off the appliance Oven door and glass panels Setting the oven function WHAT TO DO IF… Changing the oven temperature INSTALLATION Stopping the oven function Cooling fan ENVIRONMENT CONCERNS Residual heat indicator WWW.ELECTROLUX.COM Oven functions Meat programmes Subject to change without notice...
Safety information SAFETY INFORMATION Before the installation and use, read this manual carefully: • For your personal safety and the safety of your property • For the respect of the environment • For the correct operation of the appliance. Always keep these instructions with the appliance also if you move or sell it. The manufacturer is not responsible if incorrect installation or use results in damage.
Safety information • Built in ovens and built in cooking surfaces are attached with special connection sys- tem. To prevent damage to the appliance, only use an appliance with the appliances from the same manufacturer. Electrical connection • The appliance must be earthed. •...
Safety information • For your personal safety and the safety of your property, only clean the appliance with water and a soap. Do not use flammable products or products that can cause corrosion. • Do not clean the appliance with steam cleaners, high-pressure cleaners, sharp objects, abrasive cleaning agents, abrasive sponges and stain removers •...
Product description PRODUCT DESCRIPTION General overview Control panel Electronic programmer Smell filter Heating element Oven lamp Meat probe socket Oven lamp Bottom heat Oven shelf runners, removable Shelf positions Inside of door You will find the shelf position number on the inside of the oven door. Oven accessories •...
Before first use For cakes and biscuits. • Deep roasting pan To bake and roast or as pan to collect fat. • Meat probe To measure how far the meat is cooked. BEFORE FIRST USE WARNING! Refer to "Safety information" chapter. Initial Cleaning •...
Daily use Indicators XXXXX XXXX Symbol status bar Menu status bar Text line Clock functions. Period of operation Shelf levels Time. Meat core temperature Heat indicator Temperature Menu status bar Indication Function A bar in the status bar flashes. The position in a menu is shown. The status bar is not shown.
Daily use Button Function Description RAPID HEAT UP To switch the rapid heat up function on or off. To select oven function, clock function and SELECTION MEATPROBE. To set values (e.g. temperature, time, weight, de- PLUS, MINUS gree of cooking). Menu operation to move in menu to access the Options menu from the Oven functions menu...
Daily use Oven functions Function Application To bake food on maximum three levels at the same time. TRUE FAN Set the oven temperature 20 °C - 40 °C lower than for CONVENTIONAL . To bake food with more intensive browning and a crispy FAN BAKING base on one level.
Daily use Meat programmes with Application Weight weight input BONED POULTRY Refer to the booklet „Tables, Tips and Recipes“ for information on the oven functions, oven programmes and automatic recipes. Inserting the Oven Accessories Put in the slide-in accessories so that the double side edges are at the back of the oven and point down to the bottom.
Daily use 1. Switch on the appliance. 2. Put the point of the meat probe into the centre of the meat. 3. Put the meat probe plug into the socket on the side wall of the oven. 4. The display shows MEATPROBE and 5.
Daily use Meat programmes with weight input If you set the weight of the meat, the appliance calculates the roasting time. 1. Use to set the meat programme. The weight flashes. 2. While the weight flashes, use to set the weight of the meat. The setting changes in steps of 0.1 kg (for POULTRY in steps of 0.2 kg).
Daily use • There are 10 memory positions for recipes; • There are 10 memory positions for recipes with set core temperatures for the meat probe. Saving settings for "personal recipes" 1. Set the oven function and the oven temperature. 2.
Daily use MENU DESCRIPTION SMELL FILTER OFF The function only switches itself on for self-cleaning (after about 100 hours). HEAT+HOLD MENU HEAT+HOLD ON The function is switched on after the clock function DURATION or END is completed. HEAT+HOLD OFF The function is switched off. EXTRA TIME MENU EXTRA TIME ON The function is switched on after the clock function DURATION or...
Daily use 3. Use to open SETTINGS MENU . 4. Use to go to the necessary setting. 5. Use The display shows the set value. 6. Use to set the new value. 7. Use The display shows SAVED for some seconds and goes back to the OVEN FUNCTIONS menu.
Daily use Do not put the food into the appliance until RAPID HEAT UP function is completed and the appliance operates with the set function. 1. Set the oven function. 2. If necessary, change the recommended temperature. 3. Use . The display shows If the heat indicator bars flash one after the other, RAPID HEAT UP function is on.
Daily use With DURATION and END the oven switches off automatically. After used at the same time, the display shows PROGRAMMED . You can only change the TIME OF DAY if : • the CHILD LOCK is not switched on; •...
Care and cleaning Oven temperature Switch-off time 120 °C - 200 °C 8.5 h. 200 °C -250 °C 5.5 h. 250 °C -maximum °C 3.0 h. After an automatic cut-out, use any button to operate the appliance again. If you set the clock function DURATION or END , the automatic cut-out switches off.
Care and cleaning 2. Pull the rear shelf support rail away from the side wall and remove it. Installing the shelf support rails Install the shelf support rails in opposite sequence. Important! The rounded ends of the shelf support rails must point to the front! Oven Ceiling You can fold down the heating element on the oven ceiling to clean the oven ceiling easily.
Care and cleaning Put a cloth on the bottom of the oven for protection of the oven light and glass cover. Replacing the oven lamp 1. You can find the lamp glass cover at the back of the cavity. Turn the lamp glass cover counterclockwise to remove it. 2.
Page 23
Care and cleaning 3. Close the oven door until the first posi- tion (angle approximately 45°). 4. Hold of the oven door with one hand on each side and pull it away from the oven at an upwards angle. 5. Now you can remove the inner glass pan- els and clean them.
What to do if… WHAT TO DO IF… WARNING! Refer to "Safety information" chapter. Problem Possible cause Solution The oven does not heat up The appliance is switched off Switch on the appliance The oven does not heat up The clock is not set Set the clock.
Installation INSTALLATION WARNING! Refer to "Safety information" chapter. The built-in unit must meet the stability requirements of DIN 68930. 200 cm 560 min. 530 min. 550 min. max. R1200 mm alternativ 100 H05VV-F H05RR-F min. 1600 mm...
Environment concerns 90 º 2x3,5x25 ENVIRONMENT CONCERNS The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.