Craftsman 247.24019 Operator's Manual page 14

15.
16.
17.
Installthechute tubeextensionontothe chuteelbowby lining up
thetabs and slidingthe adapteroverthe chute elbow,as in Fig.
26. Securethe chuteadapterby stretchingthe chute strapand
hookingit onto the grass-catcher p in previouslyinstalled.
Figure 26
Peelthe backingoff of the self-adhesive foam strip (721-04388)
that has beenincludedwith yourgrass collector.Applyit to the
upperchute,flushagainstthe flangeas shownin Fig. 27.
Flange
I
Figure27
With the grass catchercover open, install the discharge chute
overthe chute extensiontube, as seen in Fig. 28, and rest the
top end intothe upperchute support installedon the right-hand
side of the bin support assembly.See Fig. 29.
Figure28
NOTE: Thegrooveon the upperchute shouldbe alignedwith the
upper chute support,as seenin the insetof Fig. 29.
Figure 29
14