LG 42LV3700 Owner's Manual page 53

EXTERNAL CONTROL DEVICE SETUP 131
12. OSD Select (Command: k I)
To select OSD (On Screen Display) on/off.
Data 00: OSD off Data 01: OSD on
KN
13. Remote Control Lock Mode (Command: k m)
To lock the remote control and the front panel
controls on the set.
Data 00: Lock off Data 01 : Lock on
: Ji J:ii K/
If you're not using the remote control and front panet
controls on the Monitor set, use this mode. When
main power is on/off, remote control lock is released.
If Key Lock is on in the standby mode, TV wilt not
turn on by POWER button of remote control and on
the TV.
14. Treble (Command: k r)
To adjust treble.
You can also adjust treble in the AUDIO menu.
Data Min: 00 - Max: 64 (*transmit by Hexadecimal
code)
*Refer to "Real data mapping".
i,
15. Bass (Command: k s)
To adjust bass.
You can also adjust bass in the AUDIO menu.
i etj
Data Min: 00 - Max: 64 (*transmit by Hexadecimal
code)
*Refer to "Real data mapping".
j: N
16. Balance (Command: k t)
To adjust balance.
You can also adjust batance in the AUDIO menu.
Data Min: 00 _ Max: 64 (*transmit by Hexadecimal
code)
*Refer to "Real data mapping".
aS
17.3D (Command: x t) (For 3D TV)
To change 3D mode for TV.
i
Data 1
00: 3D On 01: 3D Off
02: 3D to 2D 03: 2D to 3D
Data2
00: Top and Bottom 01 : Side by Side
02: Check Board 03: Frame Sequential
Data3
00: Right to Left 01 : Left to Right
Data4
3D Depth: Min : 00 _ Max : 14
(*transmit by Hexadecimal code)
*If datal is 00 (3D On), data4 has no meaning.
*If datal is 01 (3D off) or 02 (3D to 2D), data2, data3
and data4 have no meaning.
*If data1 is 03 (2D to 3D), data2 and data3 have no
meaning.
al _oData2 _Iata4
Ol
o2
x : Don't care
iiii:_i@_i@i!@_!i_i_ ¸i_i_i_i_;_i!ii!_i_ii:_:i!ii@i_ii_i_i!_i_!ii:ii_ili:_i_i_@
18. Color Temperature (Command: x u)
To adjust color temperature.
You can also adjust color temperature in the
PICTURE menu.
mi,
Data Min: 00 _ Max: 64 (*transmit by Hexadecimal
code)
*Refer to "Real data mapping".
n vvi et KN ]:i
19. Extended 3D (Command: x v) (For 3D TV)
To change 3D option for TV.
n i
Data1 : 3D option
00: 3D Picture Correction
01: 3D Depth (2D to 3D Only)
02: 3D Viewpoint
03: 3D Picture Size
04: 3D Picture Balance
05: 3D Optimization
Data2: It has own range for each 3D option
determined by Data1.
1) When Datal is 00
00: Right to Left 01 : Left to Right
2) When Data1 is 01
Data Min: 00 ~ Max: 14 (*transmit by Hexadecimal code
3) When Datal is 02
- LZ9700 series
Data Min: 00 ~ Max: 06 (*transmit by Hexadecimal code)
- Other models
Data Min: 00 ~ Max: 14 (*transmit by Hexadecimal code)
4) When Datal is 03
00: Just Scan 01 : 16:9
5) When Datal is 04
00: Off 01: On
6) When Datal is 05
Data Min: 00 ~ Max: 02 (*transmit by Hexadecimal code
Use the feature depending on your modek