Verifying Order Contents And Entering A Password - Sony UP-CR10L Operating Instructions Manual

Verifying Order Contents and
Entering a Password
1
Verify that the print quantity, pricing, and other items
are correct. Then touch the [Print Start] button.
The numeric keypad appears in the right part of the
screen.
Memo
If password (or budget code) input was disabled at the
administration screen, printing starts immediately
when the [Print Start] button is touched.
2
Enter the password and touch the [OK] button.
Use the numeric keypad on the screen to enter the 4-
digit password. This can be either the checkout
password or the administrator password.
Memo
If budget code input was selected at the administration
screen, enter the budget code instead of the password,
and then touch the [OK] button.
The printing process starts. When all necessary data
have been read from the memory card, a message
about removing the memory card appears. Remove the
memory card from the memory card slot.
Note
Do not remove the memory card before this message
is shown. Otherwise data on the memory card may be
erased or corrupted. Removing and inserting an
expansion CompactFlash card during printing may
also cause improper printout.
Memo
By creating a password file in the unit's administration
screen and saving the file on a memory card, you can
insert the memory card into the unit to enter a
password instead of using the on-screen numeric
keypad. For details, see "Entering Passwords Using
Memory Cards (Remote Password Input)" on page 52.
37
Selecting Images for Printing