Computer Input
Input Source Selection (Computer 2: RGB)
Direct Operation
Choose Computer 2(RGB) by pressing the INPUT button on the top control or press the COMPUTER 2 button
on the remote control.
Remote Control
COMPUTER 2 can not be selected when using the COMPUTER IN 2/
MONITOR OUT terminal as MONITOR OUT output.
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Use the Point
then press the Point
2
Use the Point
▲▼
then press the SELECT button.
When Computer 2 is selected, analog RGB input
source will be selected directly.
Note:
When the Input Search function is set to On1 or On2,
the input signal will be searched automatically (p.45).
28
COMPUTER 2 button
Computer 2(RGB)
buttons to select Input and
▲▼
or the SELECT button.
►
buttons to select Computer 2 and
Top Control
INPUT button
Input Menu
Computer 1
Computer 2
HDMI
Video
S-video