Cleaning Lock; Automatic Time Limitation - Bosch NIT5665UC Use And Care Manual

Cleaning lock
Note
Cleaning the control panel while the cooktop is on may change the settings.
To avoid this, the cooktop has a control panel pause function.
Press the Clean lock symbol until the _ indicator appears. The control panel is
locked for approximately 35 seconds.
The surface of the control panel can now be cleaned without risk of changing the
settings.
After the time has elapsed, a warning beep will sound and the function is
deactivated. The control panel lock has been deactivated.
This block does not affect the Clean lock symbol or the main switch. The control
panel pause function can be deactivated and the cooktop can be switched off at
any time.
Automatic time limitation
The automatic time limitation function is activated if the element is used for
prolonged periods without any modifications being made.
The element stops heating. F, B and the residual heat warning light H/h flash
alternately on the element display.
The indicator goes out when any symbol is pressed. The element can now be reset.
When the automatic time limitation function is activated, this is controlled by the
selected heat setting (from 1 to 10 hours).
21