Page 1
TOSHIBA Carrier REMOTE CONTROLLER FOR AIR CONDITIONER (SPLIT TYPE) Owner's Manual Remote Controller Model name: Simple wired remote controller RBC-AS21UL Owner's Manual Remote controller for air conditioner (Split type) Manuel du proprietaire Telecommande pour climatiseur (Type split)
Page 2
Simple wired remote controller Owner's Manual Thank you very much for purchasing TOSHIBA/Carrier Remote Controller for Air Conditioner. Please read this "Owner's manual" carefully before using your Remote Controller for Air Conditioner. • Be sure to obtain the "Owner's manual"...
• Make sure to install the air conditioner specified by TOSHIBA/Carrier and ask the exclusive dealer when installing, tf the air conditioner is installed by yourself, it may cause electric shock or fire, etc.
Page 4
Simple wired remote controller Owner's Manual CAUTION CAUTIONS ABOUT INSTALLATION • Do not install the remote controller in a place where its signals do not reach the indoor unit. • Do not install the remote controller in a place under the direct sunlight or close to any heat source.
Simple wired remote controller Owner's Manual PART NAMES AND FUNCTIONS Max. 8 indoor units can be operated by a remote controller. Push each button to select a desired operation. • The details of the operation needs to be set up once, afterward, the air conditioner can be used by pushing (I) ON/OFF button only.
Page 6
Simple wired remote controller Owner's Manual II ..9 ----4"+TEs._T S_ _ _ t:_ Operation mode Error code display The selected operation mode is Error code is displayed when an displayed. error occurs. While 2 is displayed, the indoor fan Fan speed display stops or the mode is Low speed Selected fan speed, ,,_,...
Simple wired remote controller Owner's Manual HOW TO OPERATE INDOOR UNIT (During FAN mode, the fan speed is • COOL/HEAT AUTO ®, not automatically changed.) HEAT _,_, DRY 6, Push either or [_ to select COOL _, FAN R a desired temperature.
Page 8
Simple wired remote controller Owner's Manual • Automatic Cool/Heat When all indoor units in the identical refrigerant system are controlled as a group, the cooling or heating operation is automatically performed with the difference between the setup temperature and the room temperature.