Table of Contents
Advertisement
Special processes - OXIVARIO and ORTHOVARIO
Warning and Safety
instructions
These warning and safety
instructions are in addition to those
given at the beginning of this
booklet.
H
O
solution must only be used in
2
2
the special containers and adapters
provided by the Ecolab and Dr. Weigert
companies.
Important: observe the
manufacturer's safety instructions as
given on their safety data sheet.
Be especially careful when handling
H
O
solution. It is an irritant chemical.
2
2
Observe all current safety instructions
pertaining to its use.
Wear protective gloves and goggles.
Empty containers must be disposed
of in accordance with the
manufacturer's instructions.
H
O
solution must not be mixed
2
2
with other chemicals. This could cause
a serious chemical reaction, e. g. the
release of harmful vapours or gases.
Only use tenside cleaning agents
supplied by Ecolab or Dr. Weigert.
Connecting the H
container
The connection hose for the H
solution container is identified by a
black label. The connection hose is
supplied without a safety cap as the
container for hydrogen peroxide will
vary depending on supplier.
Connect the supplier's safety cap to
the connection hose (black).
Then connect this to the H
solution container.
DOS2-FILL
Then start the
programme.
Unlike with other chemical agents the
H
O
solution container must be fully
2
2
emptied before it is exchanged for a
new one.
Do not replace the H
container with a new one until the
DOS 2 CONTAINER
displayed. After connecting the new
container you must run the
programme.
CHECK DISPENSING SYSTEM 2
If the
message appears you should check
the container as well as the dispensing
system. The programme will stop
automatically.
O
solution
2
2
O
2
2
O
2
2
O
solution
2
2
FILL
message is
DOS2-FILL
65
- Quick Links:
- Operating Instructions
- Maintenance
- Technical Data
Hide quick links:
Advertisement
Table of Contents
