Advertisement
RULESFORSAFEOPERATION
• WARNING: D onot attempt t o operate thistooluntilyouhaveread
thoroughly andunderstand completely allinstructions, safetyrules,
etc.containedinthis manual.Failure to complycan resultin
accidents involving fire,electricshock,or seriouspersonal i njury.
Saveowner'smanual a ndreview frequently forcontinuing safe
operation, a ndinstructing otherswhomayusethistool.
• Ifthis heatingappliance is
equipped with a polarized plug (one
blade is wider than the other), this plug will fit in a polarized
outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified
electrician to install a polarized outlet. Do not change the plug
in any way.
• Keep work area clean. Cluttered work areas invite accidents.
• Avoid dangerous environment. Don't use tool In damp or wet
locations or expose to rain. Keep work area well lit.
• Keep children and visitors away. All visitors should wear safety
glasses and be kept at a safe distance from work area. DO not
let visitors contact tool or extension cord.
• Store idle tools. When not in use tools should be stored In a dry,
high or locked-up place and out of reach of children.
• Always wear safety glasses. Everyday eyeglasses have only
impact-resistant lenses; they are NOT safety glasses.
• Don't abuse cord. Never carry tool by cord or yank it to
disconnect from receptacle. Keep cord from heat, oil and sharp
edges.
• Maintain tools with care. Keep tool clean for best and safest
performance.
• Disconnect tools. When not in use, before servicing,
or when
changing tips, all tools should be disconnected from power
supply.
• Never use in an explosive atmosphere.
Keep away from
combustible materials.
• Stay alert. Watch what you are doing and use common sense.
Do not operate tool when you are tired. Do not rush.
• Drugs, alcohol, medication. Do not operate tool while under the
influence of drugs, alcohol or any medication.
• Hot irons can cause severe bums. Use tool carefully.
Do not
touch metal parts of tool when in use.
• Always rest tip on tool stand provided when not in use. This is
to prevent bum damage to adjacent materials.
• Save these instructions. Review them frequently and use them
to instruct possible third-party
users. If you loan someone this
tool, loan them these instructions also.
• When servicing use only idenl_cal Craftsman replacement parts.
• Use this tool in well ventilated areas only.
• To prevent tips/points
and branding heads from "freezing" in tool,
apply graphite to threads and, using pliers, loosen tips in tool
after each use.
Advertisement
