Connecting The System To Power - Dell PowerEdge M620 Getting Started Manual

Connecting The System To Power

Figure 4. Connecting Power To The System
Connect the system's power cables to the system power supplies.
CAUTION: To prevent the power cables from being disconnected accidentally, use
the plastic clip on each power supply to secure the power cable to the power
supply, and use the strap to secure the cable to the strain-relief bar.
Plug the other end of the power cables into a power distribution unit (PDU).
CAUTION: Do not plug the power cables directly into a power outlet; you must use a
PDU. For optimal system functionality, a minimum of three power supplies are
required.
5