Fujitsu fi-5120C Operator's Manual page 107

fi-5120C / fi-5220C Image Scanner Operator
Guide
5.2 Replacing the Pad Assy (2)
6. Reset the Pad Counter.
When turning on the power, check that the scanner is connected to your PC.
Open the [Scanners and Cameras] from the [Control Panel] of your PC.
Open the properties dialogbox of fi-5120Cdj or fi-5220Cdj from the [Scanners and Cameras].
The properties dialogbox of fi-5120C or fi-5220C appears.
Click the "Device Set" tab.
The following screen is displayed.
After clicking the [Clear] button beside "Pad" in "Page Counter", click the [OK] button.
The following screen is displayed.
Click the [OK] button. The Pad counter returns to "0".
1
1
All Rights Reserved Copyright 2006-2009 © PFU LIMITED
TROUBLE SHOOTING
CONTENTS MAP
TOP
2
2