Download Print this page

Specifications; Safety Standards - Fujitsu FBR211 SERIES Manual

Fbr211 series miniature relay 1 pole - 1 to 2 a (for signal switching)

Advertisement

n SPECIFICATIONS
Item
Contact
Arrangement
Material
Resistance (initial)
Rating (resistive)
Maximum Carrying Current
Maximum Switching Power
Max. Switching Voltage*
Maximum Switching Current
Minimum Switching load*
(reference)
Coil
Nominal Power (at 20°C)
Operate Power (at 20°C)
Operating Temperature
Operating Humidity
Time Value
Operate (at nominal voltage)
Release (at nominal voltage)
Life
Mechanical
Electrical
(Refer to the REFERENCE DATA)
Other
Vibration Resistance
Shock
Resistance
Weight
*
1
If the switching voltage exceeds the rated contact voltage, reduce the current. The current values vary according to the type
of load.
*
2
Values when switching a resistive load at normal room temperature and humidity and in a clean environment. The minimum
switching load varies with the switching frequency and operation environment.
n INSULATION
Item
Isolation (initial)
Dielectric
Strength
n SAFETY STANDARDS
Type
Compliance
UL
UL 110
E63615
CSA
C22.2 No. 14
LR 40304, LR 46016
Standard (A or B type)
1 form C (SPDT)
Gold-overlay silver-palladium / gold-overlay silver
Maximum 100 mΩ (at 0.1 A 6 VDC)
0.5 A 120 VAC or 1 A 28 VDC
2 A
60 VA or 28 W
1
220 VAC or 150 VDC
1.25 A (AC) or 2 A (DC)
2
Plastic sealed 1 mA, 1V
Flux free 1 mA, 5V
Approximately 450 mW
Approximately 315 mW maximum
–25°C to +55°C (no frost)
45 to 85%RH
Maximum 5 ms
Maximum 5 ms
5 × 10
6
operations minimum
3 × 10
operations minimum (at
5
1 × 10
5
operations minimum (at
1 × 10
5
operations minimum (at 0.5 A/120 VDC resistive load)
10 to 55 Hz (double amplitude of 1.5 mm)
Misoperation
100 m/s
2
(11±
Endurance
1,000 m/s
2
Approximately 4 g
Standard (A or B)
Minimum 100 MΩ (at 500VDC)
500VAC 1 min. (standard)
1,500VAC 1 min. (high isolation coil and contact)
Contact rating
Flammability: UL 94-V0 (plastics)
0.5A, 120VAC (resistive)
1A, 28VDC (resistive)
FBR211 SERIES
Approximately 200 mW
Approximately 140 mW maximum
–25°C to +75°C (no frost)
1 A/ 28 VDC resistive load)
2 A/ 12 VDC resistive load)
1
ms)
60 m/s
(11±
1
ms)
High sensitive (C or E)
High sensitive (C or E type)
2
(11±
1
ms)
3

Advertisement

loading

This manual is also suitable for:

Fbr211sad001-nFbr211nad001-nFbr211sbd001-nFbr211nbd001-nFbr211sad003-nFbr211nad003-n ... Show all