Fujitsu ScanSnap N1800 Software Manual page 20

9. For [File Name], enter a file name for the scanned data to be posted to
Salesforce Chatter.
The following file names cannot be used:
The following symbols cannot be used:
\ / * " : < > ? |
On the [File Name] window which is shown by pressing
default file name format can be selected.
10. Press the [Scan] button.
When [Scan Viewer] is [Off], press the [Scan&Post] button.
The scanning starts.
The procedures after scanning or for viewing the scanned data are the same as
when scanned data is sent via e-mail or saved to a folder. For details, refer to the
Operator's Guide of the ScanSnap N1800.
11. When the posting process is completed, the [Main Menu] or [Job Menu]
window is shown again.
3.1 Posting the Scanned Data to Salesforce Chatter
CON
PRN
AUX
CLOCK$
NUL
COM0 - COM9
LPT0 - LPT9
20
for [File Name], a