Printing And Copying Problems - Epson Stylus Photo RX620 Quick Manual

Printing and Copying Problems

The Stylus Photo RX620 is on, but nothing prints.
Make sure the USB cable is securely connected at both ends.
If you're using a USB hub, try connecting the Stylus Photo RX620 directly to
your computer's USB port instead.
Run a nozzle check as described on page 58. If the check page prints, make
sure your Stylus Photo RX620 software is installed correctly.
If you're printing on a network, you need to set up your Stylus Photo RX620
for network printing, as described in the on-screen Reference Guide.
The Stylus Photo RX620 makes printing sounds, but nothing prints.
The print head nozzles may need cleaning; see page 58 for instructions.
Make sure the Stylus Photo RX620 is on a flat, stable surface.
Printing or copying is too slow.
Make sure your system meets the requirements listed in the on-screen Reference
Guide. If you're printing a high-resolution photo, you need more than the
minimum requirements. You may also need to:
Clear space on your hard disk or run a defragmentation utility.
Close open programs that you're not using.
Increase your system's memory (RAM).
For the fastest printing:
Select as the Quality Type (Windows) or set the Quality/Speed slider to
Draft
(Macintosh) in your printer software.
Speed
If your document doesn't include color, choose
as the ink setting (Macintosh) in your printer software (see your on-
Black
screen Reference Guide), or press the x
Turn
Super MicroWeave
your printer software.
If your Stylus Photo RX620 is connected to a USB hub, disconnect any
unused USB devices.
B&W
®
off (Macintosh only) and
(Windows) or
Black Ink Only
button.
High Speed
Problems and Solutions
on in
63