Disassembling The Printer Mechanism; Printhead - Epson Stylus NX105 Service Manual

Epson STYLUS NX100/NX105/SX100/SX105/TX100/TX101/TX102/TX103/TX105/TX106/TX109/ME 300

4.5 Disassembling the Printer Mechanism

4.5.1 Printhead

Parts/Components need to be removed in advance:
Scanner Stand/Cover Wire (p 60), Scanner Unit
Panel Unit (p 64)
Removal procedure
1. Release the Carriage Lock and move the Carriage to the center.
Locked
Carriage Lock
Figure 4-26. Removing the Printhead (1)
DISASSEMBLY/ASSEMBLY
(p 62), Middle Housing (p 63)
Unlocked
Carriage Unit
Disassembling the Printer Mechanism
2. Release the FFC from the tabs of the Carriage.
Figure 4-27. Removing the Printhead (2)
3. Pull out the FFC from the connector of the CR Contact Module (CN1).
CR Contact Module (CN1)
Figure 4-28. Removing the Printhead (3)
Revision A
FFC
Head FFC
Tab
FFC
Confidential
68