Advertisement
Available languages
Available languages
Spindle Lock
--
Slider Switch
Depressed Cente
Wheel
Guard
Auxiliary Side Handle
_r
FULL ONE YEAR
WARRANTY
ON CRAFTSMAN
ANGLE
GRINDER
If this Craftsman
angle grinder
fails due to a defect
in material
or workmanship
within
one
year from the date of purchase,
Sears
will replace
it free of charge.
WARRANTY
SERVICE
To obtain
replacement
under this warranty,
return the angle
grinder
to your nearest
Sears
store in the United States.
This warranty
applies
only while this angle grinder
is used in the United States.
This warranty
gives you specific
legal rights,
and you may also have other rights which
vary from state to state.
Sears,
Roebuck
and Co., Dept.
817WA,
Hoffman
Estates,
IL 60179
d_, WARNING!
Read and understand
all
instructions.
Failure
to follow
all
instructions
listed below
may result in
electric
shock,
fire and/or
serious, personal
injury.
SAVE THESE
INSTRUCTIONS
Work
Area
o Keep your work area clean and well lit.
Cluttered
benches
and dark areas invite
accidents.
* Do not operate
power
tools
in
explosive
atmospheres,
such as in the
presence
of flammable
liquids,
gases,
or dust.
Power tools create sparks
which
may ignite the dust or fumes.
, Keep
bystanders,
children,
and
visitors
away while
operating
a power
tool.
Distractions
can cause you to lose
control.
Electrical
Safety
• Grounded tools must be plugged into
an outlet properly installed and
grounded in accordance with all codes
and ordinances. Never remove the
grounding prong or modify the plug in
any way. Do not use any adaptor plugs.
Check with a qualified electrician if you
are in doubt as to whether the outlet is
properly grounded. If the tools should
electrically malfunction or break down,
grounding provides a low resistance path
to carry electricity away from the user.
Applicable only to Class I (Grounded)
tools.
Double insulated tools are equipped
with a polarized plug (one blade is
wider than the other.) This plug will fit
in a polarized outlet only one way. If
the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit,
contact a qualified electrician to install
a polarized outlet. Do not change the
plug in any way. Double Insulation []
2
Advertisement
