Contents What You Can Do With EMP Monitor Operating Environment ... 2 Before Starting Operations... 2 Registering Projectors for Monitoring Registration Using Automatic Detection... 4 Registration Using IP Address (Manual Registration) ... 5 Editing the Manually-Registered Projector List ... 5 Deleting a Projector from the Projector List...
What You Can Do With EMP Monitor You can display status information on a computer screen for multiple projectors that are connected to a network and also carry out batch operations on all projectors such as turning the power on and off and changing the input source.
EMP Monitor is started from that point onwards. PROCEDURE Click "Start" - "Programs" (or "All Programs") - "EPSON Projector" - "EMP Monitor" in that order to start EMP Monitor. Click the "Register projector" icon. Click to add a projector to be monitored.
Registering Projectors for Monitoring Registration Using Automatic Detection PROCEDURE Click the "Auto detect" button in the "Register projector" window. Select the projector(s) to be registered, and then click the "Add" button. If a projector does not appear in the list, use "Registration Using IP Address (Manual Registration)".
Registering Projectors for Monitoring Registration Using IP Address (Manual Registration) PROCEDURE Click the "Manual registration" button in the "Register projector" window. Enter the IP address for the projector to be registered in the "IP address" box, and then click the "Confirm" button.
Main EMP Monitor Window The main window shows the status information for each projector. To carry our operations for projectors, select the projectors from the projector list and then click the buttons. To close the window, click the in the top-right corner. Button Functions The power can be turned on or off and the input source can be changed for the projectors that are selected from the projector list.
Main EMP Monitor Window Understanding the Projector List The projector list uses the following icons to show the projector statuses. Status: Shows the projector status. Power on and normal status Power off and normal status Power on and abnormal status Power off and abnormal status Network error (such as not connected to network or power cable not connected)
Main EMP Monitor Window Displaying Detailed Information You can check detailed information on the status of individual projectors that are connected. PROCEDURE Select the projector to be checked in the main window. Click the "View details" button. Detailed status information will be displayed in the "Details" window.
If a Projector Cannot be Monitored or Controlled Using EMP Monitor Cause Is the projector connected to Connect the network cable correctly. the network correctly? "Network Cable User's Guide Has the projector been set Check the projector's network settings. up correctly for connection If using EMP-835 to the network? Access Point Mode or Wired LAN Mode"...
Page 11
Portions of this software are based in part on the work of the Independent JPEG Group. Other product names used herein are also for identification purposes only and may be trademarks of their respective owners. EPSON disclaims any and all rights in those marks. This product uses open source software.