What To Do If You See A Blank Screen; Positioning Your Document On The Stage - Epson ELPDC03 User Manual

Using the Document Camera
14

What To Do If You See a Blank Screen

If an image doesn't appear, try the following:
Make sure the cables are connected correctly, as described on
I
page 8.
Make sure everything is turned on in the correct order as
I
described on page 12.
Make sure the
I POWER
panel are green and the lamps are lit.
If an image still doesn't appear, refer to Chapter 4 for more help.
I

Positioning Your Document on the Stage

Place your document with the top near the rear of the stage. If you
need to change the orientation of the document, rotate the camera
head 90° to the right or 90°/180° to the left.
Some documents can pass through the rear of the document camera.
Use the paper pass-through slot to position these documents as
needed.
paper
pass-through
slot
and lights on the control
Auto Focus
rotate camera head 90°
rotate camera head 90°/180°