Download Print this page
Epson Ensemble HD Schematic Diagram

Epson Ensemble HD Schematic Diagram

Epson home cinema system instructions manual
Hide thumbs Also See for Ensemble HD:

Advertisement

Ensemble HD
H o m e C i n e m a S y s t e m
Ensemble HD Schematic

Advertisement

loading

Summary of Contents for Epson Ensemble HD

  • Page 1 Ensemble HD ™ H o m e C i n e m a S y s t e m Ensemble HD Schematic...
  • Page 2 Sub Woofer Output Connector (RCA Style) Pin: Signal Shield: Signal Ground Speaker Output Connector (Molex 10-Conductor) Assignment Epson strongly recommends that the home theatre system be installed by a professional audio/video installer or other qualified professional. Epson cannot provide advice concerning construction practices or building codes in your area.
  • Page 3 Motorized Screen Control AC Input AC Output Screen Motor Projector Control AV Remote Trigger Power LED I/R Emitter Cables Color, Length and Quantity Item 10-Conductor Speaker Cable 4-Conductor Speaker Cable HDMI Kit RS-232 Control Cable IR Data Cable AC Main Power Jumpers HD15 Cable All electrical wiring should be completed by an electrician qualified and licensed to...
  • Page 4 Projector blue blue Rear surround speakers Speaker cable Speaker cable Subwoofer BASS CONTOUR CONTROL PWR ON MODE SUB OUT 110 VAC power cable RS-232 Control cable Motorized Screen blue L/C/R speaker connectors Audio Input Connector 110 VAC power cables Main power cord HDMI cable HDMI repeater and power supply...
  • Page 5 On Wall Installation minimum distance: 2.5” Speaker cable, Control cable, 110 VAC power cable, HDMI cable 9.8 - 20.8 feet Speaker 100 “ cable, Control cable, 110 VAC power 16:9 aspect cable, ratio HDMI cable Cables and wiring encased in plastic track along the wall and ceiling Motorized Screen Wall Mount Front View Wall...
  • Page 6: Important Safety Instructions

    Important Safety Instructions CAUTION: To reduce the risk of electric shock, do not remove the cover (or back). No user serviceable parts inside. Refer servicing to qualified personnel. CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
  • Page 7: Additional Safety Instructions

    • The home theater system should be installed by a professional audio/video installer or other qualified professional. Epson cannot provide advice concerning construction practices or building codes in your area. • Prior to installing the home theater system, read the installation instructions completely. Keep these instructions in an easily accessible place for future reference.
  • Page 8 routing wires. Personal injury and/or damage to the equipment could result from dropping or mishandling it. • Make sure the screen is completely closed before placing it on or lifting it off the wall or ceiling mount. • Do not route the included power cables through the wall or ceiling. They are not rated for this purpose. Deliberate mis-installation could result in fire or other safety hazards.
  • Page 9 • This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied in your home, consult your product dealer or local power company. •...