Epson ActionNote 4SLC2-50 User Manual page 85

ADVANCED CMOS SETUP options (continued)
Option
System Boot Up
Sequence
Password
Checking
Option
Video BIOS
Shadow
E000,64K
LCD Contrast
Enhancement
Full Height
Cursor
Internal cache
memory
Non-cacheable
Block 1 Size
Non-cacheable
Block 1 Addr
Non-cacheable
Block 2 Size
Non-cacheable
Block 2 Addr
Function
Specifies the order in which the computer checks the
drives when looking for the operating system; the
default (C:, A:) loads the operating system from drive
C; if you want to load the operating system from
diskette, change this setting to A:, C:
Enables or disables password security; select
Always to enable password checking whenever the
computer is turned on or reset; select Setup to enable
password checking only when you start the Setup
program; if you enable this option, you then select the
option to specify your password
CHANGE PASSWORD
Enables or disables shadow RAM for the video BIOS; if
you enable this feature, the system copies the
contents of its video BIOS into RAM so it can perform
certain operations faster
Enables or disables the LCD contrast enhancement
feature; to enable this feature, you can specify
foreground, background, or both
Enables or disables a full height cursor; the normal
cursor is an underscore _; the full height cursor is a
rectangle
Enables or disables the 1 KB internal memory cache
built into the microprocessor; when the cache is
enabled, the system performs most efficiently
Enables or disables a non-cache block of memory;
your computer automatically caches all system
memory unless you enable a non-cache block of
memory
Displays the starting address of the non-cache block of
memory
Enables or disables a non-cache block of memory;
your computer automatically caches all system
memory unless you enable a non-cache block of
memory
Displays the starting address of the non-cache block of
memory
Running Setup 5-9