Related Manuals for Epson C82372
Summary of Contents for Epson C82372
- Page 1 ’ ’ ® ®...
- Page 2 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- Page 3 Neither is any liability assumed for damages resulting from the use of the information contained herein. Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses,...
-
Page 4: Declaration Of Conformity
Product Name: Model: Conforms to the following Directive(s) and Norm(s): Directive 89/336/EEC: EN 55022 Class B June 1999 H. Horiuchi President of EPSON EUROPE B.V. SEIKO EPSON CORPORATION 3-5, Owa 3-chome, Suwa-shi, Nagano-ken 392-8502 Japan EPSON EUROPE B.V. Prof. J. H. Bavincklaan 5 1183... - Page 5 (2) this device must accept any interference received, including interference that may cause undesired operation. Trade Name: Type of Product: Model: EPSON AMERICA, INC. 20770 Madrona Avenue MS: B2-11 Torrance, CA 90503 Telephone : (310)782-5254 EPSON...
-
Page 6: Table Of Contents
Selectiing a Printer Driver....11 About EPSON Monitor 3 ....12 Technical Specifications ....13... -
Page 7: Introduction
It can be connected to Macintosh ports. The required printer driver is supplied with the interface card. The EPSON Monitor 3 utility can also be used to display the printer status on the computer. - Page 8 Multiple IEEE 1394 devices can be connected simultaneously in a daisy-chain configuration. In addition to connecting the printer to the computer as an IEEE 1394 device via the interface card, you can also use the same interface card to connect other IEEE 1394 devices.
-
Page 9: Unpacking
Unpacking The C82372 option package contains an IEEE 1394 interface card, an interface cable, a printer software CD-ROM and this user’s guide. C82372 IEEE 1394 interface card Interface cable Printer software CD-ROM User’s Guide... -
Page 10: System Requirements
System Requirements Supported printers The following printers are available for use with your interface card: EPSON Stylus™ PRO 5000, EPSON Stylus PRO 9000, EPSON Stylus COLOR 900, EPSON Stylus COLOR 1520, EPSON Stylus COLOR 3000 (Jan 1999) Note: Consult your dealer for the most up-to-date information on supported printers. -
Page 11: Mode Setting
Mode setting The IEEE 1394 operational mode is set with DIP switch 10. Change the position of the DIP switch as needed. Note: The DIP switch 10 must be set to ON (advanced mode) when connecting the printer to a Macintosh. See page 15. Function Reserved 2–8... -
Page 12: Installing The Card
Installing the Card Follow these steps to attach the interface card to the printer. Switch the printer power off, and remove the power plug from the socket. If an interface cable is already attached to the printer, disconnect it. Attach the interface card to the printer. Refer to the printer manual for details on attaching the card. -
Page 13: Connecting To A Computer
Connecting to a computer The interface card is equipped with two cable connectors. One is used to connect the card to the computer, and the other is used to connect other IEEE 1394 devices in a daisy chain. Use the cable supplied when making the connection. - Page 14 When connecting the printer to a computer with other IEEE 1394 devices If IEEE 1394 devices are already connected to the computer, connect the printer so that it is the last IEEE 1394 device in the chain. Computer Note: Both ends of the cable supplied have six pins. If IEEE 1394 devices with four-pin connectors are used, a different cable must be used (a 6:4 converter cable).
-
Page 15: Installing The Printer Software
Installing the Printer Software Macintosh printer software in six different languages are stored in separate folders on the CD-ROM. Install the printer software for the language you prefer. Make sure your Macintosh and printer are connected, and that both are turned on. Insert your printer software CD-ROM. -
Page 16: Selectiing A Printer Driver
Selectiing a Printer Driver Open the Chooser. Click the icon for your printer. Select the FireWire port by clicking on it. Turn background printing on or off, as neccessary. Close the Chooser. You are now ready to print. -
Page 17: About Epson Monitor 3
About EPSON Monitor 3 If EPSON Monitor 2 is being used with the printer, it will automatically be upgraded to EPSON Monitor 3 when the printer software is installed. The following features have been added: The Paper Size, Paper Type and Printer Name can now be confirmed in the printer queue. -
Page 18: Technical Specifications
Technical Specifications IEEE 1394 Interface Basic specifications Data transfer method: Synchronization method: Clock synchronization Encoding/decoding: Logic level: Compatible connectors: Half-duplex Data/Strobe differential serial with DS-Link DS-Link 3.3 V IEEE 1394-1995 compatible... - Page 19 Connector pin signal layout Signal number name TPB* TPA* Power class Power class code 100 No power supply from external sources Fitted with a repeat function with bus power Jumper Jumper 2–3 2–3 Cable power supply Cable ground Strobe during receipt, data during transmission (differential pair) Data during receipt, strobe during transmission (differential pair)
-
Page 20: Dip Switch
DIP switch SW No. Function Reserved 2–8 Reserved Self test Mode — — — — Self test mode Normal operation mode Advanced Standard Factory setting... -
Page 21: Testing The Card
Testing the Card Run a self test on the card if the printer is not working normally, or if the interface cannot be connected to determine if the card is functioning normally. When you run the self test, the printer prints the current card settings and the data from addresses <30>H to <39>H. - Page 22 Remove the interface card from the printer. Set DIP switch 9 on the card’s circuit board to OFF. 10. Reconnect the interface card to the printer.