Connecting The Scanner To Your Computer - Epson Perfection 1240U Photo Startup Manual

Connecting the Scanner to Your Computer

Make sure that your system meets the requirements. (See
"Technical Specifications" in your Online Reference Guide for
details.) Then connect the scanner to your computer or USB hub
as follows:
Note for Macintosh users:
Be sure to install the scanner software before connecting the scanner to
your computer. See Chapter 2, "Installing the Software," for details.
Note:
If you connect the scanner through more than one hub, your system may
not work properly. In this case, try connecting the scanner directly to
the computer's USB port. Also, your system may not work properly if
you use a USB cable other than that supplied by EPSON.
1. Connect one end of the cable (Type B) to the USB port on the
back of the scanner.
USB interface connector
1-10
Setting up the Scanner