Table of Contents
Advertisement
3.1 Configuring and controlling the projector via a web browser (continued)
3.1.4 Port Settings
Displays and configures communication port settings.
Item
Network Control Port1
(Port:23)
Port open
Authentication
Network Control Port2
(Port:9715)
Port open
Authentication
Image Transfer Port
(Port:9716)
Port open
Authentication
SNMP Port
Port open
Trap address
SMTP Port
Port open
Click [Apply] button to save the settings.
NOTE
• The new configuration settings are activated after restarting the
network connection. When the configuration settings are changed, you must
restart the network connection. You can restart the network connection by
clicking [Network Restart] on the main menu.
3. Management with Web browser software
Configures command control port 1 (Port:23).
Click [Enable] check box to use port 23.
Click [Enable] check box when authentication is required for
this port.
Configures command control port 2 (Port:9715).
Click [Enable] check box to use port 9715.
Click [Enable] check box when authentication is required for
this port.
Configures the image transfer port (Port:9716).
Click the [Enable] check box to use port 9716.
Click the [Enable] check box when authentication is required
for this port.
Configures the SNMP port.
Click [Enable] check box to use SNMP.
Configures the destination of the SNMP Trap in IP format.
Configures the SMTP port.
Click [Enable] check box to use the e-mail function.
Description
7
Advertisement
Table of Contents
