Epson Stylus Photo 2000P Setup Manual page 6

4. Choose Install Printer Driver/Utility, then click
dialog box that appears to start the printer software installation.
.
5. Follow the on-screen instructions to turn on your printer.
For Windows 98 users, the printer port configuration starts
automatically.
For printers connected via USB cable, the USB device driver
installation starts automatically at this point. If a message appears
asking you to restart your computer, follow this instruction.
6. After turning on the printer, the Setup utility opens automatically.
Follow the on-screen instructions to install the ink cartridges, check
the print head nozzles, and clean the print head. When a message
appears informing you that the setup is complete, click OK.
Note:
If the Setup utility does not start, go to step
using the printer's control panel.
7. When a message appears informing you that the installation is
complete, click OK.
Note:
If an error message appears, either the printer driver or the EPSON USB
printer device driver is not installed correctly. See "Troubleshooting" in
the Daily Use guide for instructions.
. Click OK in the
to install the ink cartridges