Using Eye-Fi Cards - Canon EOS REBEL T2I Instruction Manual

Using Eye-Fi Cards
With a commercially-available Eye-Fi card already set up, you can
automatically transfer captured images to a personal computer or
upload them to an online service via a wireless LAN.
The image transfer is a function of the Eye-Fi car& To set up, use the
card and to troubleshoot any image transfer problems, refer to the Eye-
Fi card's instruction manual or inquire the card's manufacturer.
This product is not guaranteed to support Eye°Fi card
functions (including wireJess transfer). In case of an issue
with an EyeoFi card, pJease check with the card manufacturer°
Also note that an approval is required to use Eye-Fi cards in
many countries or regions. Without approval, use of the card
is not permitted. If it is uncJear whether the card has been
approved for use in the area, please check with the card
manufacturer.
_ insert an _=yeoFi card. (p.31)
2
Select [EyeoFi settings].
_ Under the [_'] tab, select [Eye°Fi
settings], then press <_>.
_ This menu is displayed only when an
Eye-Fi card has been loaded in the
camera.
_ nabme the EyeoFi transmission.
_ Press <_>, set [Eye°Fi trans.] to
[EnabJe], then press <_>.
_ If you set [Disable], automatic
transmission will not occur even with
the Eye-Fi card loaded (Transmission
status icon ,'_F_).
_ isplay the connection
information.
_ Select [Connection info.], then press
2O8