Recharging the Battery
–
<
> mark
Battery charge
Red lamp
Blinks once per
0–50%
second
Blinks twice per
50–75%
second
Blinks three times
Over 75%
per second
Almost full
Stays on
22
Connect the power cord.
1
•
Connect the power cord to the charger.
•
Connect the power plug to an AC outlet.
Remove the cover.
2
•
Store the cover in a place where it will not be lost.
•
If you remove the battery from the camera, be sure
to reattach the cover to protect against short circuit.
Attach the battery.
3
•
Align the battery's top edge with the <
the charger. While pressing down the battery, slide
it in the direction of the arrow.
•
To detach the battery, follow the above procedure in
reverse.
Recharge the battery.
4
When the battery is attached to the charger,
s
recharging starts automatically and the red lamp
starts blinking.
A completely exhausted battery takes about 90
s
minutes to almost fully recharge.
•
The blinking frequency of the red lamp indicates the
progress of the recharging.
After the battery recharging is almost com-
s
pleted, the red lamp will stop blinking and
remain lit. Recharging the battery for another
hour will fully recharge the battery.
•
After recharging the battery, detach it and unplug
the power cord from the power outlet.
–
> mark on