Canon EOS REBEL XS Instruction Manual page 31

Installing and Removing the Card
The captured image is recorded onto the card (sold separately)=
_]_ Make sure the card's write protect switch is set upward to
enable writing/erasing,
Installing the Card
Open the cover.
® Slide the cover as shown by the
arrow to open it=
Card's write _,
protect switch
Shots remaining
insert the Card.
® As shown by the illustration, face
the card's JabeJ side toward you
and insert it until it cJicks in pJace.
,3
Close the cover.
® Close the cover and slide it in the
direction shown by the arrow until it
snaps shut.
® When you set the power switch to
<ON>, the number of remaining
shots will be displayed on the LCD
monitor.
_ "The Shots remaining depends on the remaining capacity Of the Card,
image-recording quality, ISO speed, etc
® The [_" Shoot wlo card] menu option set to [Off] will prevent you from
forgetting to install a card. (p.108)
31