Install Cartridges - Epson B B-300 Start Here Manual

3

Install cartridges

1
Open the cartridge cover.
2
Unpack the 4 ink cartridges.
3
Shake each cartridge for about 5 seconds.
4
Make sure the cartridge lever is all the way up, then install each
cartridge in the correct slot for its color.
The arrow mark should be on top and pointing toward the printer.
Push each cartridge in until it clicks.
5
After you install all 4 cartridges, lower the cartridge lever to the
locked position.
6
Close the cartridge cover.
The printer starts charging the ink. This takes about 3 minutes.
Caution: Don't turn off the printer or open any covers while it is
charging or you'll waste ink.
Note: The printer ships with full cartridges and part of the ink from
this first set of cartridges is used for charging the printer.
Cartridge lever