Brother MFC-8510DN Basic User's Manual page 160

Level 1 Level 2
7.Network 1.Wired LAN
(MFC-8710DW) (Continued)
(Continued)
2.WLAN
See Network User's Guide.
Please go to the Brother Solutions Center to download the manual at http://solutions.brother.com/.
 The factory settings are shown in Bold with an asterisk.
LDAP, Internet Fax and Scan to E-mail Server functions are available as a download.

 To use these functions, please download the necessary software from our web site, the Brother
Solutions Center at http://solutions.brother.com/.
 Level 2 menus inside parentheses appear if you download IFAX/E-mail options to your machine.
148
Level 3 Level 4
—
3.Wired Status
—
4.MAC Address
5.Set to Default —
—
6.Wired Enable
1.TCP/IP 1.Boot Method
(IP Boot
Tries)
2.IP Address —
3.Subnet Mask
Level 5 Options
—
Active 100B-FD
Active 100B-HD
Active 10B-FD
Active 10B-HD
Inactive
Wired OFF
— —
—
1.Reset
2.Exit
—
On*
Off
—
Auto*
Static
RARP
BOOTP
DHCP
—
00003*
[00000-32767]
[000-255].
[000-255].
[000-255].
[000-255]
— [000-255].
[000-255].
[000-255].
[000-255]
Descriptions Page
You can see the
See .
current wired
status.
Shows the MAC
address of the
machine.
Restore the wired
network setting to
factory default.
Enable or Disable
the Wired LAN
manually.
Chooses the
BOOT method that
best suits your
needs.
Specifies the
number of
attempts the
machine will try to
obtain an IP
address when the
Boot Method is
set to any setting
except Static.
Enter the IP
address.
Enter the Subnet
mask.