Trouble Shooting; No Response From The Status Led On The Dongle And The Sticks; Both Dongle And Sticks Work Normally, But It Still Could Not Build Up Mutual Connections; The Connection Between Dongle And Sticks Has Been Established, But The Sticks Fail To Function - Asus Eee Stick GMC-1 User Manual

Trouble Shooting

No Response from the Status LED on the Dongle and the
Sticks
1. Please confirm that the Dongle has been connected to USB slot and
has accessed to that device.
2. Please confirm the sufficiency of energy volume of
Activation/Navigation Sticks.
3. Press the power Buttons of two Controllers 1 second and then
release; both Status LEDs on the Controllers and Dongle begin to
blink.
4. If the Status LED fails to respond, please contact ASUS maintenance
sites.
Both Dongle and Sticks work normally, but it still could not build
up mutual connections
1. The connection distance should be below 10 meters, and the
suggested optimum connection distance is within 2 meters.
2. Please reboot Eee Stick. Pressing the power Button of two
Controllers one second and release it, and then both Status LEDs on
the Controllers and receives begin to blink. When the connection is
established, LED 1 will keep constantly turning on( if user is player 2,
LED 2 will be on constantly).
3. Please rebind your Eee Stick. Pressing the power Button of two
Controllers until both Status LEDs on the Controllers and receives
begin to blink.
4. If there are too many wireless devices around, it will impact the Eee
Stick connection quality.
5. If the connection still fails, please perform rebinding.
The connection between Dongle and Sticks has been
established, but the Sticks fail to function
1. Please confirm operation of Eee Stick correctly yet.
2. Under Windows Operating System, please confirm the mode is
Mouse Mode. If no, please press MODE button + Button 2 to switch
Mouse Mode.
3. Please confirm whether there are other interferences from
surrounding wireless devices or whether the connection distance is
too far away.
4. If the computer system is down, please make a forced shut down of
program to reboot.
27